Dakota Digital LED Tail Lights LAT-NR161 Installation Instructions Manual

Contents

service and repair

Dakota Digital LED Tail Lights LAT-NR161 Installation Instructions Manual Manual pdf 1 page image

MAN#650159cINSTALLATION INSTRUCTIONSLAT-NR161LED Tail Lights for ’60-‘65 Impala/Bel Air/Biscayne, ’67 Impala,‘75-‘76 Caprice, and ’71-’73 MustangMAN#650159cKit Includes:Installation:1. Remove the original bulb connector from the back side of the housing.2. Remove the light bulb.3. Remove the tail light lens.• On the 60-65 Impala, the screws are directly in the lens.• On the 67 Impala, the nuts securing the tail light assembly must be removed first frominside the trunk. Once the assembly is removed, the screws on the back of the housingcan be taken out.• On the 75-76 Caprice, the nuts securing the tail light assembly must be removed first frominside the trunk. Once the assembly is removed, the screws on the top and bottom sides ofthe housing are removed and the metal trim taken off. Last the screws holding the lens areremoved so the lens can come off.• On the 71-73 Mustang, the lens is snapped into place with tabs around the outside edge.Carefully pry the lens off using a flat blade screwdriver.

/ 4

Related manuals for Dakota Digital LED Tail Lights LAT-NR161