Dakota Digital MVX-8X00 Manual

Dakota Digital MVX-8X00 Manual Manual pdf 1 page image

1 MAN#650508BMVX-8X00 gauge kitGauge kit for 1996-2003 ModelsThank you for purchasing the Dakota Digital MVX gauge kit for your Harley Davidson Touring bike. This kit is designed tobe a direct plug in replacement for all touring models from 1996 – 2003. The kit includes the following gauges andfeatures:Speed - programmable speed calibration, performance menu, two trip meters, odometer, count down service miles, hoursrunning, miles to empty, security and check engine indicatorsTachometer – programmable tach, clock, gear position, cruise control indicator, ABS indicator, and high RPM recallOil Pressure – programmable warning point, uses stock sensor or Dakota Digital sensor for higher pressureOil Temperature – programmable warning point, complete with new sensorVolts – programmable warning pointFuel Level – low fuel warning, uses factory sensorAir Temperature – uses factory sensorINSTALLATIONRemove the outer fairing and factory gauges; this will vary by model, please follow the service manual to expose the wiringand gauges. Don’t be alarmed by the amount of wires behind the fairing, this is a direct plug in kit and these detailedinstructions will guide you through it.Pic of Street Glide with outer fairing removed Pic of Road Glide with outer fairing removedREMOVAL OF FACTORY GAUGESNow you are ready to start unplugging and removing the gauges. Start with the speedometer and tachometer gauge plugsand speedometer cable if you are working on a cable drive bike (1996-1999).IMPORTANT NOTE! This gauge has an odometer preset option that is only available for the first100 miles (160km) of operation. See “preset odometer” for instructions. Take note of mileage if you wish totransfer mileage over to new gauges.