Dakota Micro, Inc.8659 148½ Ave. SECayuga, ND 58013www.dakotamicro.comAuthor: CNR Title: UserMan DMOV-7MQ-C2 Rev: 02/25/19Quad View Monitoring SystemUsers ManualPart Number: DMOV-7MQ-C2www.dakotamicro.comTROUBLESHOOTINGProblem Possible CausesNo picture, no sound Improper connection with 12v power adapter. Use of unauthorized power supply Monitor is in OFF positionNo picture Check whether AV cable is securely plugged inNo sound Check whether audio connector is secure Check whether the sound volume is turned off or downDark picture Ensure that bright and contrast settings are properlyadjusted Ensure monitor is warm enoughNo color Ensure color settings are properly adjusted in menuUpside down or lateralinverted picture Check horizontal/vertical adjustment on remoteEvent Triggers notactivating (i.e. Nopicture during triggeredevent) Event trigger is not securely connectedRemote Controller Fault Battery may be dead or improperly installed:replacement battery Model:CR2025,3V Remote controller is not pointed in the direction of thereceiving sensor on monitor Too far away or improper angle: The maximum effectivedistance between the remote controller and the receivingsensor is 15 feet and the angle is 30 degrees. Obstacle: Move any obstacles out of the path