1Installation and Advanced Programming InstructionsHP8211-1RJ and HP8321-1RJ Heat Pump ThermostatsThese instructions are intended for installation and first time set up of the thermostat.For day to day use please refer to the User Instruction Sheet.Unpacking and installing the thermostat1. Thermostat location 2. Unpacking the thermostatNote: a wall plate (code no:087N8000WP) is available tocover a wider area whenretrofitting.Contents- Ordering Details for Series 8000 Product Range _________________________ 1- Unpacking and installing the thermostat ________________________________ 1- Setting the DIP switches (optional) ____________________________________ 2- Attaching the thermostat to the wallplate ________________________________ 2- Wiring Instructions _________________________________________________ 3- Using remote sensors (optional) _____________________________________ 3- Programming the event times (setbacks) and temperatures ________________ 4- Summary table of Advanced Programing Mode (APM) options ______________ 5- Detailed description of Advanced Programming Mode (APM) options ________ 6- Trouble shooting guide _____________________________________________ 8- Thermostat specification table _______________________________________ 8- Contact information ________________________________________________ 8Ordering Details for Series 8000 Product RangeNumber of Stages & Application Model Code Number1 Heat 1 Cool for heat/cool systems (no occupancy relay) HC8111-1 087N6807NA1 Heat 1 Cool for heat/cool or heat pump systems HC8111-1RJ 087N7224NA2 Heat 2 Cool for heat/cool systems HC8221-1J 087N6939NA2 Heat 2 Cool for heat/cool systems (battery operated) HC8220-1J 087N6940NA2 Heat 1 Cool for heat pump systems HP8211-1RJ 087N6959NA3 Heat 2 Cool for heat pump systems HP8321-1RJ 087N6963NAAccessoriesRemote room sensor TS2/2 087N728500Duct mounting sensor TS5 087N681200Outdoor sensor TS6 087N681300Optional wall plate for 8000 Series thermostats 1810 087N8000WP