© Danfoss A/S (IR/MWA), 01-2010 DKRCI.PI.HT0.E3.02 / 520H2195 1027R9788027R9788InstructionHeat Cartridge KitICAD 600 / ICAD 900 for ICMHeat cartridge holderHeat cartridge1A1B1CHeat conduction compoundICADCode numbersHeat Cartridge KitCode numberHeat Cartridge Kit ICAD 600 forICM 20ICM 25ICM 32027H1200027H1205027H1210027H1209Heat Cartridge Kit ICAD 900 forICM 40ICM 50ICM 65027H1201027H1206027H1211027H1219Fig.12.5 mm Hexagon key2.5 mm Hexagon keyThe Heat Cartidge Kit contains:Heat cartidge•Heat cartidge holder•Heat conduction compound•Technical dataDanfoss recommends the installation of the Heat CartridgeKit ICAD 600 / ICAD 900 on ICM motor valves in thefollowing applications:When the media temperature through the ICM valve is lowerthan –30oC (–22oF).When the ICM valve is installed outdoor and the mediatemperature through the ICM valve is lower than –10oC (14oF).When the ICM is installed indoor, with relative humidity higherthan 90%, and when the media temperature though the ICMvalve is lower than –10oC (14oF).Voltage24 V d.c / 24 V a.cLoad1.5 A / 30 WCableThe Heat Cartridge is delivered with 1 m (39 in.) cable.3 × 0.5 mm2 (3 × ∼ 20 AWG).Brown and Blue: 24 V d.c (polarity unimportant), 24 V a.c•Yellow/Green: Ground/Earth•