Danfoss KP 61 Installation Manual

Also see for KP 61: Installation guide Instructions

Contents

installation guide

Danfoss KP 61 Installation Manual Manual pdf 1 page image

t ≥ t + 2 °C (3.5 °F)ttDanfoss60-730.15Varpor chargeKP 61, KP 62, KP 63 Max.KP 68, KP 69 : 120 °C (250 °F)KP 71, KP 73: 80 ° C (175 °F)KP 75 : 110 °C (230 °F)KP 77 : 130 °C (265 °F)KP 79 : 150 °C (300 °F)KP 81 : 200 °C (390 °F)Varpor chargeAdsorption chargeDanfoss60-731.14Drip proof IP30(EN 60529)10 – 32 UNCDanfoss60-735.12max. / in.(3 mm)Cable entry/ in. int.thread accepts/ in. NPT or NPS Danfoss60-733.12min. -40 °C (-40 ° F)max. 65 °C (150 °F) Danfoss60-732.12Installation guideThermostatTypes KP 61 - KP 81© Danfoss A/S (AC-MCI / jmn), 2013-11 DKRCC.PI.CA0.C1.22 / 520H8304 1060R9748060R9748KP 61, KP 62, KP 63, KP 68, KP 69 vapor chargeKP 71, KP 73, KP 75, KP 77, KP 79, KP 81 adsorption charge (cross ambient)Auto reset Manual reset Auto reset(w/o hand knob) w/ hand switchTypes Bulb typesVarpor charge Adsorption chargeMounting requirement Max. bulb temperature Ambient temperaturesEnclosureCable entry Required cap. tube length on evaporator80 in. cap. tube: min. 16 in.196 in. cap. tube: min. 22 in.CAUTION: The mounting panel must beplane to avoid damage of control.

/ 4

Related manuals for Danfoss KP 61