Danfoss VLT LCP 601 Installation Manual

Danfoss VLT LCP 601 Installation Manual Manual pdf 1 page image

Installation guideRemote VLT® Control Panel LCP 601 and MountingKitVLT® Soft Starter MCD 6001 Overview1.1 DescriptionThe remote VLT® Control Panel LCP 601 can be mounted up to 3 m (9.8 ft) away from the soft starter. The LCP is rated IP65 whenmounted correctly in accordance with these instructions.The LCP connects to the soft starter via the DB9 connector on a hardware expansion card. A hardware expansion card must be installedto use the remote LCP with the soft starter. Separate kits are available with a dedicated LCP connector expansion card, or with noexpansion card for applications already using another smart card.1.2 Parts ListItem QuantityRemote VLT® Control Panel LCP 601 1LCP connector expansion card (selected kits) 1Cable, DB9 1Gasket, foam 1Installation guide 1M3 x 16 screw 4M3 flat washer 4M3 spring washer 4M3 nut 4Jack screw 4Table 1: Ordering NumbersKit Ordering numberRemote VLT® Cotrol Panel LCP 601 and Mounting Kit 175G0134AN265232431650en-000101 / 175R1177 | 1Danfoss A/S © 2018.06