Danfoss iC7 Series Installation Manual

Also see for iC7 Series: Installation guide Installation guide Installation guide Installation guide Installation guide

Danfoss iC7 Series Installation Manual Manual pdf 1 page image

1 Overview1.1 DescriptionThe pedestal kit contains all parts required to install the tall pedestal for FK11/FB11 and FK12/FB12 frequency converters. The ped-estal is 400 mm (15.7 in) and replaces the standard 200 mm (7.9 in) pedestal that ships with the frequency converter. A pedestal andcable entry plate are required for proper operation of the frequency converter. The pedestal features a front grill to allow properairflow for cooling. Reuse the cable entry plate that ships with the frequency converter to maintain the IP21/Type 1 or IP54/Type 12protection rating.1.2 Kit NumbersUse these instructions with the following kits.Table 1: Tall Pedestal Kits (400 mm)Number Kit Description176F4044 Pedestal kit for FK11/FB11 frequency converters176F4037 Pedestal kit for FK12/FB12 frequency converters1.3 Items SuppliedThe following parts are contained in the kit.Table 2: Items Supplied in Tall Pedestal KitsItem QuantityPedestal 1Front panel 1Front top bracket 1Front bottom bracket 1Locking brackets 2M10x22 screw 6M8 hex nut 4M5x14 countersunk screw 6M10 nylon-insert lock nut 2AN361529835714en-000101 / 136R0257 | 1Danfoss A/S © 2022.03Installation GuideTall Pedestal Kit for FK11/FB11 and FK12/FB12iC7 Series Frequency Converters

/ 8

Related manuals for Danfoss iC7 Series

Danfoss iC7 Series Installation Manual

This manual is suitable for:

iC7 Series 176F4037 176F4044

manualsdatabase

Your AI-powered manual search engine