Danoma DRFT3644C Assembly Directions
    |
Package Contents1 Top1 Base1 Stainless Steel Heat Barrier (PolyTop Only)1 Propane Tank Carrier1 Burner1 Igniter1 Flex Tube1 Burner Assembly1 Glass Wind Guard2 Pkg Glass Beads1 Cover1 Control PanelHardware Package4 ¼” x 21/2”” Allen Head Bolts4 ¼” Flange Nuts4 3/4” Pan Head Screw1 Allen WrenchTools/Items Needed:Hammer7/16” WrenchAllen Wrench (included)1 AAA Battery (not included)#2 Square Drive BitCresent Wrench¼”x2 1/2” Allen Head BoltSTEP #1Fasten Firepit Top to Firepit Base by inserting ¼”x2 1/2”Allen Head Bolts into pre-drilled holes in frame and base(please note to keep bolt head on outside of base and fas-ten frame opposite side of door first) and fasten with ¼”flange nuts.Fasten the control panel into routed out space in base pan-el with 3/4” Pan Head Screws.Place Fire Pit Top onFire Pit Base. (pleasenote place section of topwithout pre-drilled holesin the aluminum frameabove the door of thebase).Pre-Drilled HolesFrame Without Pre-Drilled HolesSTEP#2Burner with Glass BeadsGlass Wind GuardPoly TopBaseDanoma Firepit with Poly TopStainless Steel Heat BarrierControl PanelAssembly Directions forDanoma Fire Pit & Fire Table#DFPP2544, DRFT3644CDanoma Fire Table with Poly TopPoly TopGlass Wind Guard Burner with Glass BeadsStainless Steel Heat BarrierBase |
manualsdatabase
Your AI-powered manual search engine