Darkglass Electronics Microtubes X 900 Manual

Darkglass Electronics Microtubes X 900 Manual Manual pdf 1 page image

Microtubes X 900 Manual – Darkglass Electronicshttps://www.darkglass.com/microtubes-x-900-manual/[2/15/2024 11:11:09 AM]SpecsControlsInput: Use this jack to connect your instrument via a standard ¼” monocable.Passive/Active: Use this push-button switch to change from passive toactive mode. If your bass is active it can have a hotter signal, making theamp distort earlier (feel free to use if such additional distortion is desired).X: Use this push-button to turn on or off the Microtubes X Engine whichallows you to compress and distort your bass signal in two separate bands,solidifying the clean low end and distorting the highs to taste fromarticulate to aggressive. The Microtubes X Engine operates before the EQsection.Clean Comp: Use this push-button switch to activate the compressorcircuit for the clean channel.Vol (Clean Comp): Sets the level of the clean channel when thecompressor is engaged.HPF (High Pass Filter): Controls the cutoff frequency of the high passfilter which is applied before the clean signal is fed to the distortioncircuit. Ranging from 100 Hz (for thicker, fuzzier saturation) to 1 kHz (forultra-sharp definition).SpecsBlock DiagramWarningWarrantyMicrotubes X 900 Manual900W Bass Amplifier