Dash AI Pro V2 User Manual
        |
Thank you for choosing Dash Products. Understand your needs in racing,Dash are proud to bring you the newest innovation in Competition Speedcontroller. Utilizing state of the art 32 bit (Micro- Controllers) MCUs right fromthe beginning, Dash AI is able to explore new technology and developmentin both software and hardware design. Dash AI allows Customization forMultiple programmable parameters (Using the ESC’s Program Card which canbe Purchased separately). Please read this manual thoroughly to familiarizeyourself with the installation, setup and operation. By Operating this product,you accept the Dash Warranty Terms.*** 32 bit processor *** Low resistance FET*** Continuous current *** Auto Fan controlSystem: BrushlessForward/Brake/Reverse: Yes (Factory preset at Forward/Brake)Dimensions: 41(L) x 36(W) x 20(H)mmWeight: 46g (excluding wires)Voltage Input: (4.8 – 9.9V DC)6 Cells NiCD/NiMH2-Cell LiPO / 2-3 Cell LiFePeak Current: 760AMotor Limit: Over 4.5 TurnsMotor Type: Sensored 540 sized brushless motorsB.E.C.: 6V / 7A / 3.0AMulti Protection System: Yes• Position the ESC where it is protected in the event of a crash. Use the supplieddouble sided tape to secure the ESC to the chassis.• Install/Solder the relevant battery connector (Battery Specific) to the batterywires. RED to +ve and BLACK to –ve. (WARNING! Reversing the batterypolarity will destroy your ESC and void the warranty.)• Connect supplied BEC wire(180mm) to 3pin port match the ”- + s” between thereceiver connector and ESC.• Connect supplied Switch wire to 2pin port (- o).Instruction ManualInstallation & Connectors |
Related manuals for Dash AI Pro V2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine