DataComm 70-0020 Instruction And Installation Sheet
Also see for 70-0020: Instruction/installation sheet
  |
3/13/08 Rev. 1Instruction / Installation SheetDataComm Electronics Phone/Video Module 70-00201x8 Coax 4x10 Phone ModuleStep 1 Video Attach a female F-connector onto the cable TV service or satellite serviceincoming cable. Screw the incoming cable with F-connector to the connector marked“input”. Using F-connectors, terminate all coaxial leads that have been pulledthrough the top knockout to the video splitter. Align the four mounting pins with holes in the back of the panel (uppermost position recommended) and snap into place.Step 2 Telephone Pull the telephone wires into the HCC panel from one of the sideknockouts. Install the cable from the telephone company demarcation point to the110 IDC marked from Telco. Install the twisted pair cables from each location in the house to theremaining 110 IDC connectors. Match the color-coding of the wires to thecolors on the 110 IDC connectors. The wires should be punched down, using an industry standard punch-down tool, to the 110 IDC connectors following the T568A wiringconfiguration as shown below. Line 1 is Blue, Line 2 is Orange, Line 3 is Green and Line 4 is Brown. A RJ31X port is provided for line 1 seizure by security system.White / BlueBlueWhite / OrangeOrangeWhite / GreenGreenWhite / BrownBrownINSTRUCTIONS ARE CONTINUED ON THE BACK SIDE OF THIS PAGEDataComm Electronics, Inc.6349 Peachtree StreetNorcross, GA 30071-1725888.223.7977770.662.8205www.datacommelectronics.com |
Related manuals for DataComm 70-0020
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine