1234Connect the DL3/DL3FE with RFID, enter the“Admin” passcode and select “Setup”.Select the “System” option then select the“Arrow” icon to move to the next screen.Select the “RFID” option and select “On” toenable RFID.Select the “Add RFID Tag” option.RFID Setup GuideSwipe the RFID tag at the bottom right cornerof the device until you hear a beep.56 Record the Tag ID in case the physical tag islost.Select the back arrow until you get back to the“Connect” screen. Select “Connect” to save.Video Setup Guide @ Youtube.com/datalocker7Your settings have been saved and your RFID issetup and ready for use.DL3FE with RFID

DataLocker DL3 Setup Manual

getting started

Introduction

About the DL3

First time setup

Admin password

User password

Main screen

Disconnecting your DL3

Administrator controls

System menu

User options

Self-destruct mode

RFID authentication

Virtual CD partition

Forgotten password

Frequently asked questions

Read-only mode

Auto-lock

Citrix Compatibilities

Administrator Password

Connecting The Device

Main Screen

Features

User Options

Self-Destruct Mode

Zeroize

Read-Only Mode

Auto-Lock

SafeConsole

Using A SafeConsole Managed Device

Disabling SafeConsole

Initializing And Formatting Your DL3

Formatting Your DL3 on macOS

Linux Compatibility And Conﬁguration

Frequently Asked Questions

DL3 FE