Datalogic 94ACC0163 Instructions Manual
  |
INSTRUCTIONS©2017 Datalogic S.p.A. and/or its affiliates. All rights reserved.Datalogic and the Datalogic logo are registered trademarks ofDatalogic S.p.A. in many countries, including the U.S. and the E.U.Rhino is a trademark of Datalogic S.p.A. and/or its affiliates. All otherbrand and product names may be trademarks of their respectiveowners.www.datalogic.com94ACC0163 Antenna, Roof Mount Dome, 4 dBi, 2.4 to5.9 GHzGeneral FeaturesAntenna, Roof Mount Dome, 4 dBi, 2.4 to 5.9 GHz extends W-Lan connectivity of VMC.The pack contains the following components• 1x Top cover 50mm with RP TNCconnector• 1x Antenna cable RP-TNC, N 3 m• 1x Omnidirectional calotte 4 dBi, 2,4 to5,9 GHz, NAssembling of Omnidirectional calotte 4 dBi, 2.4 to 5.9 GHzThe Omnidirectional calotte 4 dBi, 2.4 to 5.9GHz must be installed via 2 screws. Themaximum diameter of the screws shouldn’t betaller than 4 mm. To connect the antenna cableRP-TNC, N 3 m properly there must be a wholewith a diameter between 35 mm to 40 mm.Connect Omnidirectional calotte 4 dBi, 2.4 to 5.9 GHz with VMCThe connector with the smaller outer diametermust be connected to the VMC.The connector with the bigger outer diametermust be connected to the Omnidirectional calotte4 dBi, 2.4 to 5.9 GHzRhino IIAntennaScrews notincluded |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine