Datalogic Four Slot Dock Manual

Datalogic Four Slot Dock Manual Manual pdf 1 page image

Skorpio™ X3 Four Slot DockNOTERead this manual carefully before performing any type ofconnection from the terminal to a host PC using the FourSlot Dock.The user is responsible for any damages caused byincorrect use of the equipment or by inobservance of theindication supplied in this manual.The Four Slot Dock paired with a Skorpio X3 mobile computer builds areading system for the collection, decoding and transmission of barcodedata.The Four Slot Dock can charge both the terminals and the spare batteriesat the same time. The spare batteries can be charged by inserting theminto the slots at the back of the cradle.The Four Slot Dock comes in two different models, the Charger(94A150032) and the Ethernet (94A150033).The Ethernet model also provides Ethernet connection for data transfervia local area networks.Figure 1 –Four Slot DockKey:A) Link LED for Ethernet Port 1,2,3,4B) Battery charger LED for Slot 1,2,3,4C) Power supply connectorD) Ethernet Port 1 (with integrated Link and Speed LEDs)E) Ethernet Port 2 (with integrated Link and Speed LEDs)**F) Power on LED822001261 (Rev. A) Used in the Ethernet Four Slot Dock only Available in the Ethernet Four Slot Dock onlyMOBILE COMPUTER INSERTION/ REMOVALFor correct insertion into the cradle, insert the mobile computer from thetop of the cradle and push it down until the clip of the cradle clicksTo remove the mobile computer from the cradle, simply pull it upwardswhile holding the cradle firmly down..Figure 2 - Mobile Computer InsertionPower SupplyEach 4SD requires a power supply to be connected to mobile computers.We recommend the power supply 94ACC1385.-+Figure 3 - Power Supply PolarityLED INDICATORSPower LED Status Indicator (F)Color StatusGreen Cradle poweredBattery Charging LED Status Indicators (B)Color StatusOff Battery absentRed Battery charge in progressGreen Charge completedRed Blinking ErrorUSING THE SPARE BATTERY CHARGERCorrectly insert the battery pack into the slot and simply press it into theslot until the battery latch is automatically closed; charging startsautomatically.Figure 4 - Spare Battery InsertionTo remove the battery, release the latch on the battery pack.Figure 5 - Spare Battery RemovalA B FC D E

/ 2

Related manuals for Datalogic Four Slot Dock