Datavan G-POS Series Quick Installation Manual

Also see for G-615S: User manual User manual Quick installation guide

Datavan G-POS Series Quick Installation Manual Manual pdf 1 page image

Quick Installation Guide V2.0Technical Support Before You Proceed• Read safety notice and User Manual carefully before using the product.• Keep the box and packaging in case the product needs to be shipped in the future.• Follow the product and warning label instructions.• Any changes or modifications that do not follow the instructions in thismanual will void this product's warranty.Power Supply Safety Notice• To avoid electric shocks, disconnect the power cord from the electricaloutlet before relocating the system.• Make sure the voltage of the power outlet conforms within voltage rangeof the terminal. Failure to comply may cause the electric shock or damageto the terminal. If you are not sure of the electricity voltage that you areusing, contact your local electricity company.• To avoid fire or electric shocks, do not overload electric power outlets.• Protect the power cord from being walked on or pinched particularly atplug, convenience receptacles, and the point where they exit from the appa-ratus.NOTICEThe version of these drivers and manuals is subject to change withoutnotice. For update, please contact your local agent.Warning & Attention2. Turn off the POS Terminal before cleaning. Clean with dry cloth only. Do notspray any liquid cleaner directly on the screen.3. The power outlet socket used to plug in power cord must be located near thesystem and easily accessible.4. Make sure the voltage of the power source is set correctly before connecting thePOS Terminal to power outlet.5. If the POS Terminal shares an extension cord with other devices, make sure thetotal loading of the devices plugged into the extension cord does not exceed theextension cord’s maximum loading.6. Do not expose the power cord, extension cord and power outlet to moisture ortraffic intensive walkways.7. Install the POS Terminal on a sturdy and reliable surface to prevent damagecaused by dropping.POS Terminal.9. Disconnect the power cord from the POS terminal before any installation ofinternal components. Make sure both the POS terminal and the external devicesare turned off. A sudden surge of power may damage sensitive components.Also make sure the POS terminal is properly grounded.10. During installation of any internal components, be sure to ground yourself anddischarge any static electricity. Most electronic components are highly sensitive tostatic electric charge. Use a grounding wrist strap and place all electronic compo-nents in any static-shielded devices. If a wrist-grounding strap is not available,ground yourself by touching an unpainted piece of metal.11. The openings on the POS Terminal enclosure are for the cabin ventilation toprevent the POS terminal from overheating. DO NOT COVER THE VENTILA-TION OPENINGS.of time. However, hours of use will vary depending on the application environ-ment.13. If the POS Terminal is equipped with a touch panel, avoid using sharp or metallicobjects to operate the touch panel. Scratches on the touch panel may causemal-calibration or serious damage to the panel.14. The LCD panel display is not resistive to shock or vibration. When disassemblingthe POS Terminal, make sure the LCD panel is properly and securely installed.Before setting up the POS Terminal, check the package which contains followingitems. If any of the items is missing or damaged, contact your vendor immediately.Adjust the system standRFIDUnpacking Main unitCustomer Display Second LCD DisplayMSRIdentification Readeri-ButtonIdentification ReaderWireless ModuleRFIDIdentification ReaderFinger PrinterIdentification ReaderDriver disk(includeDigital User Manual)Power cord &Adapter RJ45 to DB9Converter cableVESA plate(for VESA model only)Accessory kitQuick InstallationGuide30°NOTE 1: Carefully tilt the unit backwards,some force is required.NOTE 2: Lift the head to the 1st detent wherethe screen will lock in the 30-degree position.Then the 2nd detent will lock in 60-degreeposition.NOTE 1: Because the stand joints aretight, you might need to exert someforce to maneuver the Terminal.NOTE 2: Make sure always rotatearound the head to the position "a"before adjusting the upper hinge.1. To enter the Boot Menu, pressF10.2. To set CMOS default, press F2 to enter CMOS setting and load optimized defaults3. Refer to User Manual for other technical information and FAQs. If the problemsare not resolved, contact your local vendor for further support and provide themwith the information below: product name, product serial number, and detaileddescription of your problem. 12 3a Lowerhinge

/ 2

Related manuals for Datavan G-615S