DAC-10 Quick Setup with Final Cut Pro 4 (HD)This setup guide will cover four specific areas:A. Explanation of the DAC-10 dip switchesB. Configuration of the dip switchesC. Diagrams of typical cable connectionsD. Initial Software configurationA. Explanation of the DAC-10 Dip SwitchesThe DAC-10 has dip switches to customize the converter for your hardware and software.The DAC-10 is sold throughout the world, so dip switch settings can be changed toaccommodate different regions and different firewire devices.The diagram below explains what each dip switch controls within the DAC-10.B. Configuration of the Dip SwitchesYour DAC-10 dip switches have been preset for use with Macintosh computers. Your dipswitches should be set as follows:

Datavideo DAC-10 Quick Setup Manual