37 | MCU-100/200 Camera Controller | www.datavideo.usControl Cameras from a Single LocationSave tons of time adjusting your Panasonic cameras with theMCU-100 or MCU-200(1RU Rack-Mounted) Camera Controller.Imagine this — You’re almost ready to shoot. It’s time to make sureeach camera is configured properly. But wait, how will you checkthe cameras’ outputs on the multi-view and adjust them at the sametime? If you’re by yourself, you can look at your multi-view monitor,then walk to the camera, make an adjustment, and walk back tothe multi-view. You COULD do this many times until all the camerasmatch each other perfectly on the screen. After the fifth trip to yoursixth camera, you’re finally done, but you’ve already spent at leastan hour doing adjustments.But what if you have a crew? You could have one of your staffmembers walk to each camera while you stay at the multi-view,giving him or her directions by intercom. That would be a bitfaster.BUT wouldn’t it be GREAT if you could do all the cameraadjustments yourself without having to leave your multi-viewmonitor? Now you can, with the MCU-100/200 CameraController.Control up to 4 Panasonic Video CamerasThe controller allows a distance of up to 300 meters betweenthe cameras and the controller using the included AD-1Adapters. The interface between the MCU-100/200 & AD-1is a RS-422 differential line. You can also use CAT-5e/6cable up to 3280.84 feet (1000 meters).MCU-100/200 Panasonic Cam Compatibility• AG-HPX255 • AG-HPX370• AG-HPX500 • AG-HPX600Camera Controller Functions• Rewind• Fast Forward• Record• Stop• Play• Record Check• Master Pedestal Up/Down• Auto Knee Off/OnCAMERA CONTROLLER FOR PANASONIC CAMERASMCU-100/200 MULTI-CAMERA CONTROLLERS• Color/Brightness Gain• Iris• Shutter Synchro-Scan / Fixed / Off• Auto White Balance /Auto Black Balance• White Balance A / B / Preset(Saved Settings on Camera)MCU-100Controller »AD-1Adapter(4x Included) »$2,000MSRP