Datexx DF0063 CLOCK TORCHTELEDEX Limited U.S.A. WarrantyTELEDEX INC. warrants these products to the original purchaser tobe free from defective material and workmanship. The product willbe repaired or replaced at our option, for up to one year whenreturned with proof of purchase to the address below. Include acheck or money order for $3.00 to cover postage.TELEDEX INC. 1 Atlas st. Kenilworth, NJ 07033Warranty valid only in the U.S.A. Printed in China 6/02TIME setting -Press the TIME KNOB & turn anti-clockwiseswitch on by lifting up the ALARM SWITCHPush down the ALARM SWITCH to stop alarm.User-friendly operations of Clock Light & Torch.(SLIDE SWITCH on right side of unit):Place the SLIDE SWITCH to middle position, the clock lightand torch are ON instantly by lifting up the unit.Put down unit on desk (or any flat surface) to switch OFF.You may choose to turn on the TORCH only when lifting up theunit, then place the SLIDE SWITCH to lower positionThe clock light and torch are OFF permanently whenSLIDE SWITCH is in the upper position.BATTERY replacement - Open the BATTERY COVERand insert / replace 1 piece AA size battery for the clock(inner most of battery compartment) + 2 pieces AA size batteryfor the torch.OBSERVE the correct polarities as indicated.Light BULB replacement - In case torch bulb is bumt, openthe base cover by releasing the two screws andreplace a new 2.4V 0.5A prefocus bulb.Switch Position Clock Light TorchUpper (A) OFF OFFMiddle (B) ON ONLower (C) OFF ON www.datexx.com