DayStar Filters QUARK Quick Start Manual
DAYSTAR FILTERS QUARKCongratulations on your purcha se of a Quark Hydrog en Alph“Eyepiece” solar filter. Please read this manual before using the product.To use the filter, plug in the included power supply, then place theQuark after your telescope’s diagonal and insert an eyepiece orcamera in the rear of the filter. Turn the knob to point straight awayfrom the light. When the light turns green in about 5-10 minutesyour viewing experience can begin.To prevent damage, we recommend using an Energy Rejection Filter ontelescopes of 80mm aperture or more, or when tra cking the Sun for longperiods. This can be a UV/IR cut filter mounted before the diagonal, or afull aperture red or yellow glass ERF mounted in front of the telescope.Warnings:Do not disassemble the filter, the blocking element is separated from theetalon and the complete ssembly must be used together for safe viewing.Do n ot po wer the filter from a computer or cell phone charger as theQuark requires a high current power supply (> 1.5A) for operation.For assistance:Call: 1 (866) 680-6563Email: servi ce@daystarfilters.comVisit: http://www.da ystarfilters.com |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine