DAYSTAR FILTERS SOLAREDI 66Congratulations on your purchase of a SolaREDi 66 Hydrogen Alphasolar telescope. Please read this manual before using the product.To use the telescope, plug in the included power supply, then inserta diagonal and eyepiece (not included) in the rear of the telescopeand set the focus to about 5½. Turn the tuning knob to pointstraight away from the indicator light. When the light turns green inabout 5-15 minutes your viewing experience can begin.Warnings:Do not disassemble the filter, the blocking element is separated from theetalon and the complete assembly must be used together for safeviewing.Do not power the filter from a computer or cell phone charger as theSolaREDi 66 requires a high current power supply (> 1.5A) for operation.For assistance:Call: 1 (866) 680-6563Email: service@daystarfilters.comVisit: http://www.daystarfilters.com