Dedenbear LIGHTNING Installation & Operation Manual
            |
INSTALLATIONINSTRUCTIONSInstallation Instructions ............................................................. pg 1Pro/Full Feature ........................................................................ pg 2Button Use & Programming ...................................................... pg 2Types of Delay Boxes ............................................................... pg 3Setting Transbrake Delay .......................................................pg 3-4Setting Throttle Stop Types & Timers.....................................pg 4-5Throttle Stop Control ................................................................ pg 5Starting Line Control / Super Start ........................................... pg 6General Info / Definitions .......................................................... pg 7Transbrake Wiring ..................................................................... pg 8Throttle Stop & Nitrous Wiring .................................................. pg 9Linkage Stop & Remote Display ............................................. pg 10Timed Shifter Wiring ............................................................... pg 11Setting Parameters ................................................................. pg 12MODEL NUMBERSL1 and L2LIGHTNING and LIGHTNING PLUSINSTALLATION & OPERATION MANUALINSTALLATIONBUTTON QUICK REFERENCEINDEX2650-1303-00 Rev. AUsing #8 screws through the rubber grommets in the base, mount the LIGHTNING away from heat, vibration andthe ignition system.Make sure the driver can reach the buttons when strapped in and angle the unit, if needed, so the display can beread straight on.Wire the LIGHTNING as shown on pages 8-11. Make sure the power lead comes straight from the master switchand the ground goes to a solid chassis ground, not sheet metal panels. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine