Access Gate InstructionsTools needed: battery powered driver with Phillips bit attachment, US wrenches/socket set, small hammerand pair of snips to cut through excess tension cable and tiesGate Hardware Kit Contents:QTY ITEM DESCRIPTION PART1 Small bundle of 8" 120lb strength self locking fence ties (attach fence to gate) 14 1 3/8 black steel gate corners 21 16ft black PVC coated braided steel cable (hinge side top to latch side bottom) 32 Sets of access gate hinges (male 1 5/8 support, female 1 3/8 gate) 42 1 5/8 band to 1 3/8 end cap assemblies for “L” or “L2” 51 Printed instructions (not pictured) 62 Latch assemblies for access gate 71 Bag: 20 self tapping screws, 1 turnbuckle, 2 caps for posts + 2 black wire clamps 8Note: Gate schematics are size specific and are included separately as an attachment1) Unpack gate tubing bundle and gate hardware kit on a clean level surface.2) Lay out materials and dry fit the tubing material you received into the various fittings according to yourgate schematic. You won’t need parts “M” and “L or L2” (if applicable) right now. Also, save the larger