PIR Sensor &LED LightIntroductionThe Defender PIR Alarm with Key Fob is a simple, user-friendly indoor alarm unit, perfect forinstalling in important rooms or access locations. Armed and operated using either the key fob orthe buttons on the side of the alarm, the device produces a 130dBs siren whenever the8m PIR sensor is breached. The alarm is battery operated and requires 2 x AA batteries, which areincluded.Contents• 1 x PIR Alarm Unit• 1 x Key Fob• 1 x Mounting Bracket• 1 x Adhesive Pad• 2 x Fixing screws and wall plugs• 2 x AA & 1 x CR2032 BatteriesBattery InstallationPlease note: the PIR Alarm and Key Fob come with batteries installed, please remove battery tabbefore first use. The battery compartment is accessed from the rear of the alarm unit by remov-ing the battery cover. Insert 2 x AA batteries (included) noting the correct polarity. The unit willbeep once to indicate the batteries are installed correctly. The unit is now ON. The LED light willilluminate when the batteries need replacing in the alarm unit. To replace the batteries, repeat thesteps above.NOTE: The battery compartment contains an anti-tamper function, meaning the alarm will soundwhen the battery cover is removed even if the alarm is disarmed. To change the batteries oraccess the compartment, first turn the unit OFF by long pressing the Set button, until the alarmbeeps five times. The unit is now OFF and the batteries can be accessed.The remote fob uses 1 x CR2032 battery. To replace, unscrew the screw at the base of the fob toand open the fob. Replace the battery, noting the correct polarity.Operating the Alarm UnitTo turn the unit ON, press and hold the Set button until the unit beeps once.Note: when installing batteries, the unit will auto switch ON after the batteries are inserted.To turn the unit OFF, long press and hold the Set button until the unit beeps five times.To arm the alarm press the Set button once and the unit will beep once for arm.To disarm the alarm press the Set button once and the unit will beep twice for disarm.Press the Tone button to select the desired alarm tone. Each tone will sound briefly (six in total) asyou press. When you hear your preferred tone, simply stop pressing and it will auto save.Press the Volume button to select the desired sound level (five in total). It will auto save as above.PIR ALARM WITH KEY FOBMotion Activated Household Alarm Product Code: EL00194defendersecurityproducts.co.ukSiren Volume ButtonSet ButtonTone ButtonArmDisarmHome SOS