Delfield N8831 Specifications

Also see for N8717-D: Installation, operation and maintenance manual

Contents

specifications

Delfield N8831 Specifications Manual pdf 1 page image

Short FormSpecificationsTop shall be one-piece 18-gaugestainless steel, with .60" (1.524cm)overhang around perimeter and die-stamped 19.87" x 11.87" (50.5 cmx 30.2 cm) openings with depressededges. Formed well below eachopening shall be 6.25" (15.9 cm)deep. Each well shall have anindividual infinate temperature controland 1000 watt heating elementattached to bottom of well. Unit isequipped with .5" drains, (one perwell located in right rear corner.5" female N.P.T.) manifold and .5"ball valve. Exterior housing shall be20-gauge galvanized steel. Unit shallbe insulated on sides and betweenwells with 1.00" (2.5 cm) fiberglass;bottom shall have 2.00" (5.1 cm)blanket insulation.Unit shall have all individual controlswired to a control panel for mountingin counter or at a remote location; 4'(1.2 m) length of wiring and conduitare provided. Unit shall have a three-wire electrical junction box to allowhard-wiring at installation.Optional Accessories andModifications:• Adapter plates and bars• Single- or double-service flip-upsneezeguards• Telescoping covers• Omit drains and manifoldDrop-In Individually-Controlled Electric Food WellsModel N8787-DN8700-DMODEL COUNTER CUTOUT CONTROL PANEL # OF VOLTS/HERTZ/ SHIPNUMBER A DIMENSIONS CUTOUT DIMENSIONS FOOD WELLS PHASE AMPS WEIGHTN8717-D 17.88” (45.4cm) 16.88” X 25” (37.8cm x 58.4cm) 4.62” x 7” (11.7cm x 17.8cm) 1 115/60/1 8.3 39 lbs/ 17 kgN8731-D 31.75” (80.6cm) 30.75” x 25” (73cm x 58.4cm) 4.62” x 10.31” (11.7cm x 26.2cm) 2 115/60/1 17.0 119 lbs/ 54 kgN8745-D 45.63” (115.9cm) 44.63” x 25” (108.3cm x 58.4cm) 4.62” x 14.5” (11.7cm x 36.8cm) 3 208-230/60/1 15.7 150 lbs/ 68 kgN8759-D 59.5” (151.1cm) 58.5” x 25” (143.5cm x 58.4cm) 4.62” x 18.69” (11.7cm x 47.5cm) 4 208-230/60/1 20.9 170 lbs/ 77 kgN8773-D 73.38” (186.4cm) 72.38” x 25” (178.8cm x 58.4cm) 4.62” x 22.88” (11.7cm x 58.1cm) 5 208-230/60/1 26.1 196 lbs/ 88 kgN8787-D 87.25” (221.4cm) 86.25” x 25” (214cm x 58.4cm) 4.62” x 27” (11.7cm x 68.6cm) 6 208-230/60/1 31.3 232 lbs/ 104 kgMechanical Data — Standard UnitThe Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.comDelfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.PROJECT _____________________________________ITEM NUMBER_________________________________QUANTITY _______________ DATE________________APPROVAL____________________________________NOTE: NOT TO SCALE NOTE: NOT TO SCALE6.25"15.9cm9.12"23.16cm19.87"50.5cm24.67"62.66cm25.87"66cmAA – 1.20"A – 3.05cmNOTE: NOT TO SCALE11.87"30.2cmTYPICAL PLAN VIEWN8700-D MODELS TYPICAL ELEVATION VIEWN8700-D MODELS RIGHT END VIEWALL N8700-D MODELS

/ 2

Related manuals for Delfield N8717-D