ST4427N FRONT-BREATHING SELF-CONTAINED FLAT TOP REFRIGERATORSProject __________________________Item ____________________________Quantity _________________________CSI Section 11400ST4427N FLAT TOPFront-Breathing Self-Contained Compact Flat Top RefrigeratorsSTANDARD FEATURES• All 4400 and 4500 Series units are 100% front breathing,which allows the unit to be pushed against a wall or built intoa cabinet or an existing line up• Durable, rugged stainless steel sides, top and front• Features Delfield’s exclusive ABS interior (on sides). ABSis extremely durable - it won’t dent, chip or corrode and isbacked by a limited lifetime warranty• Heavy duty self-closing hinges• “ST” prefix models have a 4” stainless steel backsplash• “D” prefix models feature Delfield’s exclusive new drawersystem. Drawers are backed by a 10-year warranty on thetrack assembly• Environmentally friendly R404A refrigerant• High density foamed in place polyurethane keeps energycosts low• Black recessed quick grip handle• Standard on 2” casters for easy cleaning and installation• 60-cycle single phase electrical system• 7’ cord and plug supplied• Cord spring relief - prevents cord rollover• One epoxy coated wire shelf standard, installed per doorsection• ACT solid state electronic control• One year parts and 90 day labor standard warranty.980 S. Isabella RoadMt. Pleasant, MI 48858www.delfield.comPhone: 800-733-8948Fax: 800-669-0619Email: info@delfield.comApproval _________________Date ____________________SPECIFICATIONSExterior top is one-piece, 22-gauge stainless steelwith integral square nosing on the front.Exterior back and bottom are two-piece 24-gaugegalvanized steel.Exterior ends are stainless steel.Interior sides of door models are thermoformed ABSplastic with integral shelves supports. Interior back is one-piece 22-gauge stainless steel. Interior bottom and topare thermoforned ABS plastic. Base is fully insulated withhigh-density foamed in place polyurethane.Refrigeration system uses HFC-404A refrigerant.Compressor is 1/5 H.P., with condenser coil and condensateevaporator mounted on rear of the cabinet. Evaporatorcoil are located on the interior rear wall of the cabinet.Refrigerant flow is controlled by a capillary tube. Cabinetmaintains an interior cabinet temperature of 36°F to 40°F(2°C to 4°C).ACT control. ACT electronic, solid state control, mountedon the exterior rear of the cabinet, allows unit to maintainprecise temperatures in heavy duty conditions.Electrical connections are 115 volt, 60 Hertz, singlephase. Unit has a 7’ (2.1m) long electrical cord and NEMA5-15P plug.Casters: Equipment is mounted on 2” (5.08cm) diameterfront locking plate casters. 2.5” (6.35cm) ride height.Doors have a 24-gauge stainless steel exterior, withthermoformed ABS plastic interior liner. Cabinet of doormodels has one adjustable epoxy-coated wire shelf.Drawers have a 24-gauge stainless steel exteriorwith thermoformed ABS plastic interior liner. Drawerframes are 12-gauge stainless steel. Drawer slides are11-gauge stainless steel with Delrin bearings. Drawerunits have two drawers. Top drawer holds one 12” x20” (30.5cm x 50.8cm x 10.1cm) and three 1/6 size4"-6" deep pans. Bottom drawer holds one 12" x 20"and three 1/6 size 4" deep pans. Pans are suppliedby others.MODELS:❑ ST4427N Single section refrigerator ❑ STD4427N Single section refrigeratorFlat top with a door Flat top with drawersST4427NOPTIONS AND ACCESSORIES❑ Flat lift off cover❑ 18” wide single tier overshelf❑ Stainless steel finish on back❑ Plastic laminate on front❑ Additional wire shelves❑ Door lock❑ Exterior thermometer❑ Interior lights❑ Glass door(s)❑ *220V/50 Hertz electrical system* Inclusion of this option will alter electricalspecifications of the unit.