Delfield ST4560N Specifications
Also see for ST4560N: Service and installation manualService and installation manualInstallation & operation manualInstallation & operation manualOriginal instructions
  | |
Contents | 
Project __________________________________Item ____________________________________Quantity ________________________________CSI Section 11400Approved _______________________________Date ____________________________________980 S. Isabella Rd.Mt. Pleasant, Michigan 48858 Phone: 800-733-8948 or 989-773-7981Fax: 800-669-0619 www.delfield.comExterior top is one-piece, 22-gauge stainless steel with integral2.12” (5.4cm) square nosing on the front. The backsplash is fullwidth and 4” (10cm) tall.Exterior back and bottom are two-piece 24-gauge galvanizedsteel. Exterior ends are stainless steel.Interior sides of door models are thermoformed ABSplastic with integral shelves supports. Interior back is one-piece 22-gauge stainless steel. Interior bottom and topare thermoformed ABS plastic. Base is fully insulated withhigh-density foamed in place environmentally friendly, KyotoProtocol Compliant, Non ODP (Ozone Depletion Potential),Non GWP (Global Warming Potential) polyurethane.Refrigeration system uses HFC-404A refrigerant. Compressoris 1/3 H.P., with condenser coil and condensate evaporatormounted on rear of the cabinet. Evaporator coils are locatedon the interior rear wall of the cabinet. Refrigerant flow iscontrolled by a txv valve. Cabinet maintains an interior cabinettemperature of -5°F to 0°F (-21°C to -18°C).Electronic control is located on the exterior back of thecabinet. It allows the unit to maintain consistent temperaturesin heavy duty conditions.Electrical connections are 115 volt, 60 Hertz, single phase.Unit has a 6’ (1.8m) long electrical cord and NEMA 5-15P plug.Casters: Equipment is mounted on 5” (13cm) diameter platecasters with front two locking. Equipment clearance above thefloor is 2.5” (6cm).Doors have a 24-gauge stainless steel exterior, withthermoformed ABS plastic interior liner. Cabinet of doormodels has one adjustable epoxy-coated wire shelf.SpecificationsStandard FeaturesOptions &AccessoriesAll 4400 and 4500 Series units are 100% frontbreathing, which allows the unit to be pushedagainst a wall or built into a cabinet or anexisting line upDurable, rugged stainless steel sides, top andfrontFeatures Delfield’s exclusive ABS interior (onsides). ABS is extremely durable - it won’t dent,chip or corrode and is backed by a limitedlifetime warrantyHeavy duty self-closing hinges“ST” prefix models have a 4” stainless steelbacksplashEnvironmentally friendly R404A refrigerantHigh density foamed in place environmentallyfriendly, Kyoto Protocol Compliant, Non ODP(Ozone Depletion Potential), Non GWP (GlobalWarming Potential) polyurethane keeps energycosts lowBlack recessed quick grip handleStandard on 5” casters for easy cleaning andinstallation60-cycle single phase electrical system6’ cord and plug supplied•••••••••••ST4560N Single section freezer, flat top with doors•ModelsST4560N Flat TopFront-Breathing Self-Contained Flat Top Freezer BasesST4560N Flat Top: Front-Breathing Self-Contained Flat Top Freezer BasesOne epoxy coated wire shelf standard,installed per door sectionElectronic controlOne year parts and 90 day laborstandard warranty18” wide single tier overshelfStainless steel finish on backPlastic laminate on frontAdditional wire shelves3” casters, 3.75” ride heightDoor lock (solid door models only)Exterior thermometer (solid doormodels only)Interior lights220V/50 Hertz electrical system*Inclusion of this option will alterelectrical specifications of the unit••••••••••••*ST4560N |
Related manuals for Delfield ST4560N
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine