Dell PowerEdge 2200 Systems Microprocessor Replacement 1Dell Æ PowerEdge Æ 2200 SystemsMicroprocessor ReplacementThis document provides the procedures for replacing the Intel Æ PentiumÆ IImicroprocessor(s) in a Dell PowerEdge 2200 system.Precautionary MeasuresBefore you perform any of the procedures in this document, take a fewmoments to read the following warning for your personal safety and to preventdamage to the computer system from ESD.WARNING FOR YOUR PERSONAL SAFETY AND PROTECTIONOF THE EQUIPMENT: Only trained service technicians should per-form the following procedures. Before you start to work on thecomputer, perform the following steps in the sequence listed.1. Turn off the computer and any attached peripherals.2. Disconnect the computer and any attached peripherals from theirpower sources to reduce the potential for personal injury.3. Disconnect any communications cables.4. Wear a wrist grounding strap, and clip it to any unpainted metal sur-face on the computer chassis.If a wrist grounding strap is not available, touch any unpaintedmetal surface on the back of the computer chassis to discharge anystatic charge from your body.WARNING: The power supply in this computer system produces highvoltages and energy hazards, which can cause bodily harm. Only trainedservice technicians are authorized to remove the computer cover andaccess any of the components inside the computer.