Dell EqualLogic PS4210 Installation Manual

Also see for EqualLogic PS4210: Installation and setup guide Hardware owner's manual

Dell EqualLogic PS4210 Installation Manual Manual pdf 1 page image

Setting Up a PS Series Storage ArrayPS4210 InstallationBefore You BeginThis poster is a condensed reference. Read the PS4210 Storage Arrays Installation and Setup Guide (provided in the box) for completeinstallation information.Register for a Dell™ EqualLogic® Customer Support Account.If you do not have a customer service support account, go to eqlsupport.dell.com/secure/login.aspx and create one.Download and Read the Release Notes from the Support Site.The PS Series Storage Arrays Release Notes contain the latest product information.Review Safety Guidelines.Review the safety instructions in your Safety, Environmental, and Regulatory Information booklet located in the shipping box.Prepare for Installation: Environmental requirementsMake sure the installation location meets the power, cooling, and ventilation requirements described in the PS6210 Storage ArraysInstallation and Setup Guide (located in the shipping box). Networking requirements- Standard Ethernet and TCP/IP networking rules apply to a PS Series SAN- 10 Gigabit Ethernet Hardware requirements (not supplied)- Standard 19-inch, four-post rack- For Ethernet connections (use a minimum of one 10GbE port per controller): With the 10GBASE-T port, CAT6 (or better) cable for up to 55 meters, CAT6A for up to 100 meters With the SFP+ port, optical cable or copper SFP+ cable- For Management connections (optional): CAT5 cable with RJ45 connector1 Unpack the Shipping BoxCaution: Protect sensitive hardware. Use an electrostaticwrist strap or a similar form of protection when handling hardware.Shipping box contents: Setup poster (this document) Rack Installation Setup Poster Rail kit (if ordered) Power Cables Documentation PS Series Storage Array2 Install the Rails into the Rack1. Remove the rail kit from the shipping box.2. Install the rails into the rack.See the Rack Installation setup poster for detailed instructions.4 Install the Front Bezel1. Hold the bezel with the array model number and Dell logo upright.2. Hook the right end of the bezel onto the right side of the chassis.3. Swing the left end of the bezel toward the left side of the chassis.4. Press the bezel into place until the release latch closes.5. Using the provided key, lock the front bezel. Store the key in a safe place.3 Install the Array into a RackWarning! The array is heavy. Do not attempt to lift the array without assistance.Mount the array into a four-post, 19-inch rack.1. Slide the array onto the rails.2. Hand-tighten the thumbscrews to the front of the rack.PS SERIES STORAGE ARRAYSInstallation & Setup ManualStep 4: Start Using the SANStep 3: Run the Remote Setup WizardPS Series Storage ArraysSoftware ConfigurationPS Series GroupsStep 1: Install the Host Integration ToolsStep 2: Collect Configuration InformationTo configure the PS Series software, you need the informationin the following tables.CHAP passwordGroup nameGroup IP addressMembershippasswordAdministrationpasswordCHAP user nameGroup ConfigurationRAID policyArray ConfigurationMember nameDefault gatewaySubnet maskArray IP addressRAID policyWhere to Go NextMulti-Member PS Series Group

/ 2

Related manuals for Dell EqualLogic PS4210