Dell PowerConnect 2216 Technical Specifications Update

Also see for PowerConnect 2216: User guide User guide

Dell PowerConnect 2216 Technical Specifications Update Manual pdf 1 page image

w w w . d e l l . c o m | s u p p o r t . d e l l . c o m0K5672A00Dell™ PowerConnect™ 2200/2300 Series Ethernet SwitchesIntroductionThis document describes changes to the technical specifications of the PowerConnect 2200/2300series Ethernet switches. This information replaces and supercedes that found in the DellPowerConnect 2216/2224/2324 Switches User’s Guide. Where any differences exist in thespecifications or procedures between the two documents, the information in this document ismore accurate.Product Specifications• PowerConnect 2216– Provides 16 ports supporting 10/100Base-T Ethernet.– All ports support full- or half-duplex mode and PAUSE frames.• PowerConnect 2224– Provides 24 ports supporting 10/100Base-T Ethernet.– All ports support full- or half-duplex mode and PAUSE frames.• PowerConnect 2324– Provides 24 ports supporting 10/100Base-T Ethernet and an additional 2 ports supporting1000Base-T Ethernet.– The 10/100Base-T ports support full- or half-duplex mode; the 1000Base-T ports supportfull-duplex mode only.– The 10/100Base-T ports support PAUSE frames; the 1000Base-T ports do not supportPAUSE frames.Front-Panel Indicators1000Base-T Ports Link/Activity (SPD/LNK/ACT) LED (PowerConnect 2324 only)• Steady green — A 1000 Mbps link has been established, but no data is being transmittedor received.• Blinking green — A 1000 Mbps link has been established and data is being transmittedor received.• Off — No link has been established.NOTE: No link will will be detected if a 10/100Base-T device is connected to a 1000Base-T port (ports 25and 26) on the PowerConnect 2324 switch.February 2004K5672A00.fm Page 1 Friday, February 20, 2004 3:45 PM

/ 2

Related manuals for Dell PowerConnect 2216