Wedge your fingers between the rear cover and themiddle bezel on the corners of the top side of themonitor to release the rear cover, then use one handto press the middle bezel, the other hand to pull upcarefully the rear cover in order of arrow preferencefor unlocking mechanisms of rear cover..Use a Philips-head screwdriver to remove fourscrews for unlocking mechanisms.(No.1~4 screw size=M4x10; Torque=12±0.5kgfxcm)S5Take out all of the QSG,accessories including DPcable, power cable, USB cable, CD&user’s manual,stand and base from the carton from thecarton.(Note: It depends on whether users returningthe accessories)S2Open the Pizza carton with a proper tool.1. Disassembly Procedures:Lift the rear cover up carefully. Disconnect the USBFFC cable from the connector of the interface board,and then remove the rear cover.S6S4S1Take out of the Paper-top and monitor from thecarton, then take out the monitor from the EPE bagand put the LCD monitor on a protective cushion.S32 34 11Go to contents pageDELL S2319HSQSGstandbasepower cableDP cableUSB cableuser’s manual3124