Delphi Mira Quick Start Manual
Mira Mobile ComputerQuick Start GuideTHE PACKAGEThe Mira package includes the following items:− 1 Mira mobile computer− 1 AC/DC power supply− 1 plug kit− 1 standard Micro USB cable (laser and 2D Imager models only)− 1 guitar pick + cordTHE TERMINALA) QVGA 64K color displayB) ON/OFF power keyC) SpeakerD) LEDsE) Scan keyF) KeyboardG) MicrophoneH) Guitar pick stylusI) Laser safety labelJ) Rear speakerK) Product label (underbattery)L) Battery coverM) Programmable side key (onboth sides of the mobilecomputer)Before using the terminal, remember to remove theprotective film covers in front of the display and of theData Capture window.NOTEr. 0.9.0.1N) Data capture window*O) DC charger connectorP) Communication/chargerconnector (through cradle)Q) MicroUSB communicationconnector (through cable)KEYPADS1. Cursor Keys2. Scan Key3. Yellow Modifier4. Blue ModifierSpecial Function IconsICON FUNCTIONAfter a blue modifier key press, itopens the Startmenu.After a blue modifier key press, it opens the filemanager.After a blue modifier key press, it switches ON/OFF thedisplay backlight.After a blue modifier key press, it switches ON/OFF thekeyboard backlight.After a blue modifier key press, it locks and unlocks thekeyboard.After a blue modifier keypress, it disables thetouchscreen and allows the user to control the devicethrough a joystick-driven cursor, with Mira sidekeysacting as left and right buttonsGETTING STARTEDInsert the Battery1. Push the latch release button and pull the latch down; then removethe battery cover.2. First insert the upper side (contacts), then the bottom side ofthebattery pack into the slot:3. Reinsert the cover. First insert the upper side and then press thelatch release button and pull the latch down to insert the bottom.Push the knurled section of the latch upwards to close the cover:Charge the BatteryWith Power SupplyWith Single CradleDo not use the Mira until batteries are charged forminimum 4 hours.CAUTIONSYNCHRONISE YOUR DEVICE WITH THE PCSet up Synchronisation using Windows Mobile®Device CenterWindows Mobile® Device Center can be downloaded from Microsoftwebsite www.microsoft.com. It is only compatible with Windows Vistaand Windows 7; if you run Windows XP or earlier, you have todownload Microsoft ActiveSync.You can establish a connection toyour Mira through thefollowing interfaces: USB either directly or through the Single Dock RS232 either directly or through the Single Dock Bluetooth®To establish a partnership between the Mira and a host PC,startWindows Mobile® Device Center and follow the steps below:1. Connect the Mira to the host PC. Windows Mobile®Device Center configures itself and then opens.2. On the license agreement screen, click Accept.3. On the Windows Mobile® Device Center’s Home screen, clickSet up your device.4. Select the information types that you want to synchronize, thenclick Next.5. Enter a device name and click Set Up.When you finish the setup wizard, Windows Mobile® Device Centersynchronizes the mobile computerautomatically. Microsoft® OfficeOutlook® emails and other information will appear on your deviceafter synchronization.Communicate with HostN2143LIJKMP QOFB CAEDG HPUSH |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine