color logocolor logocwhite logowhite logowDelphi Corporation1441 West Long Lake Road • Troy, Michigan 48098-5090 U.S.A.Customer Service/Technical Support: [1] 877.GO DELPHIwww.delphi.comwww.shopdelphi.comXM, SKYFi, and Roady are trademarks of XM Satellite Radio Inc.MyFi is a trademark of Delphi Corporation.© 2005 Delphi Corporation. All rights reserved.DPSS-05-E-024Setting Up the TransmitterNote: Your Delphi XM Satellite Radio SignalRepeater transmitter should be placed in a locationthat allows for connection to a properly placed XMhome antenna (i.e., near a south-facing window).See your satellite radio receiver user guide formore information on locating a suitable locationfor the antenna.1. Connect your home antennaand the A/C power adaptor thatcame with your Delphi XMSatellite Radio Signal Repeater inthe appropriate jacks at the backof the transmitter. You shouldsee a blue light on the front when the A/C power adaptor is plugged in, anda second blue light when the antenna is connected.2. Start by rotating the antenna to a vertical position. If necessary, adjust itto ensure the strongest signal is transmitted to the repeater antenna.3. Make sure the PWR OUT switch on the back is set to the right-hand(maximum) setting to start. See your user guide for more informationon this function.4. Your transmitter may rest flat on a horizontal surface, or it may bewall-mounted. See your user guide for more information.MYFi PackSKYFi Holiday PackSKYFi2 OverpackRoady2 Mat chboxIcon FamiliesDelphi XM Satellite RadioSignal Repeater Quick Guidecococowhite logowhite logowhite logoFor Use With Any Delphi XM SatelliteRadio Unit Home Kit or Audio SystemSA10116-11B1Caution: The Delphi XM Satellite Radio Signal Repeater operates on a 900 MHzfrequency and may cause interference with other wireless equipment. For bestresults, do not operate the Delphi XM Satellite Radio Signal Repeater in the vicinityof other equipment operating at this frequency.Caution: This quick guide and your user manual contain important safety andoperating information. Please read and follow the instructions in both. Failure to doso could result in damage to your audio system, your home, and/or other property.