Delta Premium PS1003 Assembly Instructions Manual

Delta Premium PS1003 Assembly Instructions Manual Manual pdf 1 page image

Assembly instructionsAssembled Shelving Kitwith Shelves*(Not included with all sets)PremiumShelving Kitx2 — Aluminum Slotted Uprightx4 — Cosmetic Coverx4 — Upright End Capsx4 — Arms* (x6 PS1003)x4 — Arm End Caps* (x6 PS1003)x8 — Wall Screwsx8 — Shelf Screw* (x12 PS1003)x8 — Drywall Anchorsx1 — Connector Alignment Piecex2 — Shelf* (Not included with all sets)PartsABCDEFGHIJAssembly videoVisit designbydelta.com/downloadsPlace uprights against located stud on wall andmark location for holes. Use a spirit level to makesure it is vertically aligned. Ensure second uprightis horizontally aligned and level with the first upright,when marking locations for holes. Drill 1/8" (3mm)pilot holes. Then secure the uprights to wall usingscrews provided.1NOTE: If mounting to a drywall, use the includeddrywall anchors (Part H). Drywall anchors require5/16" (8mm) pilot holes. Once holes are drilledgently tap drywall anchors into place, then secureuprights using screws provided.IMPORTANT SAFETY NOTEBeware of drilling into electrical wireor pipes within wall!WALLBOARDSTUDSTUDCENTERLINEWARNINGDo not allow children to play or hang from Shelving Kit.Maximum weight 18 kg (40 lbs) per shelf arm, evenly distributed on properly installed rack into studs.Installing into a drywall will reduce the weight capacityWay of locating studs within the wall (see hardware store for advice)Tools RequiredHand Drill1/8" (3mm) drill bit for attaching to wood studs5/16" (8mm) drill bit for attaching toconcrete wallsMagnetic Phillips Drill BitTape MeasureSpirit Level*Installing into wood studs is the recommendedmethod.16"ABCDEFGIJH

/ 2

Related manuals for Delta Premium PS1000