Step by Step Operating Manual Demon Tempest1How to start theTempestP1 of 2NBUnlock bonnet clips, liftlid and check pump oilYou will also findinstructions on the frontleft hand side of themachine on how tooperate the Tempest.lid and check pump oil.Replenish as required.2 3 4Check fuel level andreplenish as required.Unwind power leadand plug into mains. NBConnect to mains waterby pulling back inlet andnot an extension lead pushing hose on.5 6 7Connect MVG Highpressure hose. Push I MVGnipple & tighten nutConnect hose to trigger– ensure correct lancefor hot water is used.Turn on mains water.Water tank will beginto fill inside machine.8 9 10NB ‐ On first use checkwater valve shuts offwater correctly.Shut down lid and pushbutton to turn pump onto get cold water.For hot water pushbutton and hot waterwill filter through.