Denon AVR-883 Brochure & Specs

Also see for AVR-883: Operating instructions Operating instructions Service manual

Denon AVR-883 Brochure & Specs Manual pdf 1 page image

DTS-ES Discrete 6.1 and Dolby Digital EX with Power Amps for 6 Channels■ Fully Discrete, Equal Power Six Amplifier ChannelsFront ................... 110 W + 110 W (6 ohms, 1 kHz, 0.7% THD)Center................. 110 W (6 ohms, 1 kHz, 0.7% THD)Surround............. 110 W + 110 W (6 ohms, 1 kHz, 0.7% THD)Surround Back.... 110 W (6 ohms, 1 kHz, 0.7% THD)All six power amplifier channels feature discrete power outputdevices, and all six amplifier channels provide equal power with lowestdistortion. Each channel is rated at 110 watts, into 6 ohms, from 1 kHz,with no more than 0.7 % THD. A hallmark of Denon A/V component design,the equal power amplifier provides outstandingly accurate reproductionof motion picture soundtracks and multi-channel music programs.■ Single-Channel Surround Back Power AMP for 6.1 Surroundand 2 Speaker Terminals for 7.1 SurroundThe AVR-883 is equipped with a total of 6 power amps including onefor the Surround Back speaker to give you more clearly defined soundlocalization at the rear for 6.1-channel surround sources such as DTS-ESDiscrete 6.1, DTS-ES Matrix 6.1, Dolby Digital EX, and DTS-ES NEO:6.The AVR-883 also provides you with 2 speaker terminals for the SurroundBack channels, allowing for the ultimate home theater experience inamazing 7.1-channel Surround, when a second power amplifier is added.■ High Power Custom TransistorWhen temperatures rise or fall inside the unit, bias current values suppliedto the power transistor tend to fluctuate, causing sound quality todeteriorate. The high power custom transistor used in the AVR-883ensures that the bias current is constantly uniform so that the soundyou hear is of consistently stable, high quality.■ High-quality DSPA high-quality 32-bit DSP “MELODY32” from Analog Devicesprocessor has been used in the DSP processor, placing theAVR-883 at a higher rank than other models of this class in its abilityto accurately decode and reproduce the superior quality of DTS-ESDiscrete 6.1, DTS-ES Matrix 6.1, DTS NEO:6, Dolby Digital EX andDolby Pro Logic II.■ Featuring DTS-ES Discrete 6.1 DecodingThe AVR-883 is equipped with the DTS-ES (true discrete) 6.1 decoder,developed by DTS to provide dramatically improved surround soundpanoramic reproduction and superior surround sound localization.■ Supports DTS-ES Matrix 6.1 Decoding■ Supports DTS NEO:6 Surround Decoding■ Featuring Dolby Pro Logic II DecodingEnjoy 2-channel stereo recordings in stunning 5.1-channel surround playback.The Dolby Pro Logic II decoder reproduces dynamic 5.1-channel surroundsound not only from normal 5.1-channel DVD but from 2-channelsources such as videos and CDs, too. Dolby Pro Logic II uses matrixdecoding technology that has been dramatically improved over ProLogic.■ High-quality Component Video In/Out TerminalsThe AVR-883's Component Video terminals allow you to connect, andswitch, up to 2 sources utilizing these high resolution video outputs.These terminals are especially useful if your display device has onlyone set of Component Video inputs.■ Dolby Digital Decoding■ 5-CH/6-CH Stereo ModeDenon's popular 5-CH/6-CH Stereo mode transforms your favorite2-channel sources such as CD, tape, stereo radio and stereo videosources into exciting surround sound, free of delay effects andunnatural artifacts, from all five, or six, speakers. This 5-CH/6-CHStereo mode was originally developed by DENON to enhancemusic lovers' enjoyment of home theater ambience.■ 96 kHz, 24-bit Audio D/A ConvertersAVR-883DTS-ES and Dolby Digital EX A/V ReceiverN E W M O D E L I N F O R M A T I O NThe AVR-883 is equipped with 6 amplifiers of equal power, one for each channel, in a discrete configuration for total accuracy whenreproducing sound from demanding DTS-ES and Dolby Digital EX sources. The Dolby Pro Logic II feature lets you hear2-channel stereo sources in realistic 5.1-channel surround sound.

/ 2

Related manuals for Denon AVR-883