AV SURROUND RECEIVERAVR-A100 Addendum SheetThank you for purchasing DENON’s product. When you operate the unit, pleaseread the owner’s manual and this sheet.vpage 68 : AdditionParty mode functionA function has been added when playing back inparty mode that enables attendees to performcontrols such as selecting songs etc.Also, DENON products that are connected to thenetwork can control each other.n Participating in the party mode asan attendee1 Press PARTY.“Enter Party Mode?” is displayed.• An error message is displayed when you are notconnected to a network.2 Press o p to select “Yes”, then pressENTER.When you start the party mode, the monitorof the attendee (child) displays the networkmenu screen for the organizer (parent).3 Press uio p and ENTER to selectthe desired track.DENON:[AVR-A100]FavoritesInternet RadioMedia Server[1/3]PARTY ATTENDEEThe party mode function can only be used on acombination of DENON devices that are equippedwith the party mode function.vpage 102 : AdditionZone management functionDENON products that are connected to the networkcan control.The “Device Control” item was added to the“Network Setup” – “Other” – “Zone Management”menu.With “Device Control”, the network functions(Internet radio when the input source is NET/USB etc) of the device selected in step 2 can becontrolled using this product.1 Press ui to select “Network Setup”– “Other” – “Zone Management”from the menu, and then pressENTER or p.OTHERPC LanguageFriendly Name EditParty Mode FunctionParty Start LevelZone ManagementUpdate NotificationCheck the status of other Denon products onyour network and browse the network menu2 Press ui to select the device, andthen press ENTER or p.ZONE MANAGEMENTDENON:[AVR-A100]vpage 93 : ChangeMANUAL SETUPThe “Network Setup” – “Other” menu waschanged.GNETWORK SETUPHNETWORK SETUPNetwork ConnectingOtherRhapsody AccountNapster AccountNetwork InfoGOTHERHOTHERPC LanguageFriendly Name EditParty Mode FunctionParty Start LevelNetwork StatusUpdate NotificationBefore changeOTHERPC LanguageFriendly Name EditParty Mode FunctionParty Start LevelZone ManagementUpdate NotificationAfter changeRemote control operationbuttonsMove the cursor(Up/Down/Left/Right) Confi rm the setting3 Press ui to select “Device Control”,and then press ENTER.The monitor of the unit displays the networkmenu for the target device.DENON:[AVR-A100]Device ControlONAVR-A100ModelPowerNET/USBSelect Source-24.0dBVolume LevelRETURN ReturnEnter4 Press uio p and ENTER to selectthe desired track.DENON:[AVR-A100]FavoritesInternet RadioFlickrMedia ServeriPod[1/8]NapsterPandoraMENU Exit CH+ Vol. up CH- Vol. downREMOTE CONTROL• When in device control mode,is displayed on the television screen of thecontrolling device, and is displayedon the television screen of the device beingcontrolled.• For information about how to operate, see theOwner’s Manual provided with the product.The zone management function can only be usedon a combination of DENON devices that areequipped with the zone management function.NOTEThe volume of the selected device can be controlledusing this unit, but the volume level is not displayed.Be careful not to increase the volume too high.ENGLISH