Denver MIR-260 Quick Start Manual

Also see for MIR-260: Instruction manual Instruction manual Instruction manual User manual

Denver MIR-260 Quick Start Manual Manual pdf 1 page image

Denver MIR-260 Quick Start Guide by 3wisemonkeysPeelable front fascia layerThere is a peelable layer on the front fascia of your stereo – on initial inspection it is not obvious andjust looks like your stereo has a scratched appearance! Peel back the layer using a fingernail fromthe edge of the players front fascia to lift an edge and then peel it away to reveal a shiny, pristinefront.Recommended first steps:1. Remove peelable film from front of stereo2. Get your Wi-Fi password to hand (usually printed on the back of your internet router).Power up the stereo and setup WiFi access for the stereo3. Choose the EQ setting that makes the audio sound best to youBrowsing the menu systemUse the MENU button on the top of the stereo to take you to the menu system for the stereo.Use the -SCROLL+ wheel control on the top of the stereo to scroll through lists / options in thestereos menu systemPress down on the -SCROLL+ wheel control on the top of the stereo to choose any highlighted optionon the stereos menu systemUse the LEFT button on top of the stereo to go back an option on the stereos menu systemSetting up Wi-Fi on your new Denver MIR-260When first switching your new Denver MIR-260 stereo on, the stereo will boot up and eventuallyafter a minute or so ask you “Configure Network?”.If you say yes then this will take you straight to the option “ADD/REMOVE A/P”.Hit ENTER to choose “ADD/REMOVE A/P” and then choose option 1, “ADD A/P(SCAN)”. This will nowtake you to step 2 below.If you don’t initially set up the network on first switching on your MIR-260 you can go back to addthe network details via the below:1. Go in to the MENU option on your MIR-260 and choose the options: CONFIGURATION >NETWORK > WI-FI NETWORK > ADD/REMOVE A/P > ADD A/P(SCAN)… hit enter on this option “ADDA/P(SCAN)”.

/ 3

Related manuals for Denver MIR-260