Dynex DX-CR212 Quick Setup Manual
Also see for DX-CR212: ManualUser guideFrequently asked questionsGuía del usuarioGuide de l'utilisateur
Contents |
QUICK SETUP GUIDE / GUIDE D’INSTALLATION RAPIDE /GUÍA DE INSTALACIÓN RÁPIDATo access a memory card using Macintosh OS 10.4.x or higher:1 Plug the USB cable into an open USB port on your Mac.2 Insert a card into the appropriate slot. The blue data LED lights and a new driveicon appears on the desktop.Caution: Insert the cards into the correct slot and in the correct direction. Failureto do so may result in damage to your card or card reader.Note: Insert cards into the microSD and MS slot label side UP. Cards inserted intothe SD slot must be label side DOWN.3 When you have finished working with the files on the memory card, drag the diskicon to the Eject icon or click the memory card icon on the desktop and selectEject. Then remove the card from the slot.Caution: Do not remove memory cards while the blue data LED on the reader isflashing. Doing so may result in loss of data or damage to your memory card.TroubleshootingVisit www.dynexproducts.com for details.Legal noticesFCC InformationChanges or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may cause harmfulPackage contents• Memory Card Reader• Quick Setup GuideSystem requirements• Windows XP, Windows Vista, Windows 7, or Mac OS 10.4.x or higher.Features• Easily transfer music, photos, video, and other files between your computer and adigital camera, PDA, cell phone, or MP3 player.• Supports SD, SDHC, SDXC, microSD, microSDHC, MMC, and MMCplus cards• Supports MS/MS-Duo/MS-Pro/MS-Pro Duo cards• Plug & Play: no drivers required• USB 2.0 compatibleTo access a memory card using Windows:1 Plug the USB cable into an open USB port on your computer. Your computer willinstall the driver automatically.2 Insert a card into the appropriate slot. The blue data LED lights.Caution: Insert the cards into the correct slot and in the correct direction. Failureto do so may result in damage to your card and/or card reader.Note: Insert cards into the microSD and MS slot label side UP. Cards inserted intothe SD slot must be label side DOWN.3 Click Start, then click My Computer/Computer. Double-click the drive for the cardreader.4 To access files and folders on the memory card, use normal Windows proceduresfor opening, copying, pasting, or deleting files and folders.5 When you are done working with the files on the memory card, right-click thememory card drive in My Computer/Computer, then select Eject. The blue dataLED on the memory card reader turns off after the card is ejected. Remove thecard from the slot.Caution: Do not remove memory cards while the blue data LED on the reader isflashing. Doing so may result in loss of data or damage to your memory card.DX-CR21211-in-1 Memory Card Reader / Lecteur de carte mémoire11-en-1 / Lector de tarjetas de memoria 11 en 1interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.ICES-003 statementThis Class B digital apparatus complies with Canadian ICES-003;Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.One-year limited warrantyVisit www.dynexproducts.com for details.For additional information, see the online User Guide.Contact DynexFor customer service call 1-800-305-2204www.dynexproducts.com© 2012 BBY Solutions, Inc. All Rights Reserved. DYNEX is a trademark of BBY Solutions, Inc.Registered in some countries. All other products and brand names are trademarks of theirrespective owners.USB cable jackPrise pour câble USBToma para cable USBData LED indicatorIndicates when a slot is reading from or writing to a cardDEL de transfert de donnéesIndique qu'une carte est en lecture ou écriture dans la fente.Indicador LED de datosIndica cuando la ranura está leyendo o grabando la tarjeta.MemoryStick, MS PRO, MS Duo,MS PRO Duo, MS PRO-HG DuoMMC/SD/SDHC/SDXC/MMCplusNote: Insert cards into this slot with the label facing DOWN.Remarque : Les cartes doivent être insérées dans cettefente avec l’étiquette tournée vers LE BAS.Nota: Inserte las tarjetas en esta ranura con la etiquetahacia ABAJO.microSD/microSDHCWE ARE GOING GREEN!A copy of your User Guide is not providedin the box but is available online.Go to www.dynexproducts.com, clickSupport & Service. Enter your model numberin the Search field, then press Enter.Click Support/Downloads.Contenu de l’emballage• Lecteur de carte mémoire• Guide d’installation rapideConfiguration système requise• Windows XP, Windows Vista, Windows 7 ou Mac OS 10.4.x ou supérieurCaractéristiques• Facilite le transfert de musique, photos, vidéo et d'autres fichiers entre unordinateur et un appareil photo numérique, un ANP, un téléphone cellulaire ouun lecteur MP3.• Compatible avec les cartes SD, SDHC, SDXC, microSD, microSDHC, MMC et MMCplus• Compatible avec les cartes MS/MS-Duo/MS-Pro/MS-Pro Duo• Prêt à l’emploi : aucun pilote requis• Compatible USB 2.0Pour accéder à une carte mémoire sous Windows :1 Connecter le câble USB à un port USB disponible de l’ordinateur. L'ordinateurinstallera le pilote automatiquement.2 Insérer une carte dans la fente appropriée. La DEL de données bleue s'allume.Attention : Les cartes doivent être insérées dans la fente appropriée et dans lebon sens. Si ce n’est pas le cas, la carte ou le lecteur pourraient être endommagés.Remarque : Insérer les cartes dans la fente pour microSD et MS avec l'étiquettetournée vers le HAUT. Insérer les cartes dans la fente pour SD avec l'étiquettetournée vers le BAS.3 Cliquer sur Start (Démarrer), puis sur My Computer/Computer (Poste de travail/Ordinateur). Double-cliquer sur le lecteur correspondant au lecteur de cartes.4 Pour accéder aux fichiers et dossiers de la carte mémoire, utiliser les procéduresnormales de Windows pour ouvrir, copier, coller ou supprimer des fichiers et desdossiers.5 Quand les travaux sur les fichiers de la carte mémoire sont terminés, cliquer avecle bouton droit de la souris sur le lecteur de carte mémoire dans MyComputer/Computer (Poste de travail/Ordinateur), puis sélectionner Eject(Éjecter). La DEL témoin du lecteur de cartes mémoire s’éteint dès que la carte estéjectée. Retirer la carte de la fente.Attention : Ne pas retirer les cartes mémoire tant que la DEL des données bleuedu lecteur clignote. Sinon, une perte de données peut en résulter et la cartemémoire pourrait être endommagée. |
Related manuals for Dynex DX-CR212
Dynex DX-CR112 Quick Setup Manual
Dynex DX-CR312 Quick Setup Manual
Dynex DX-CRDRD Quick Setup Manual
Dynex DX-CR212 User Manual
Dynex DX-CR6N1 - USB 2.0 Memory Card Reader Quick Setup Manual
Dynex DX-CR112 User Manual
Dynex DX-CR312 User Manual
Dynex DX-CR112 User Manual
Dynex DX-CRCF12 User Manual
Dynex DX-CR212 Manual De L'utilisateur
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine