EAW JFX Suspension Kit Instructions Manual
   |
Instructions/JFX SeriesSuspension KitThese instructions apply to JFX200, JFX260, JFX290, JFX560, and JFX590 loudspeakers.DESCRIPTIONThe JFX Suspension Kit consists of Fly Clip Rings to support the weight of the loudspeakers and SplayBrackets that set the recomended enclosure splay angle for arraying.WARNING: Only persons with the knowledge of proper hardware and safe rigging techniques should attempt to sus-pend loudspeakers overhead. Failure to follow this warning may result in damage to the equipment, injury, or death.JFX Series Suspension Kit Parts List:EAW P/N Qty Description0001386 2 Clip/Fly/Ring ID 1.73See Table Below 2 Bracket/Splay104001 2 Eye Bolt/Shoulder 3/8-16102134 4 Bolt/Hex head 3/8-16105010 4 Washer/Flat 3/8105011 4 Washer/Lock 3/80005915 1 Instructions/JFX Series Splay KitFLY CLIPUsage: The weight of each loudspeaker in an array must be supported by its own Fly Clip. The user mustprovide the connection between each Fly Clip and structure capable of supporting the entire array.Installation: Insert each Fly Clip Ring into an enclosure mountingtrack. Slide it along the track until locked in place. There are ninepossible track positions, each providing a different array down angle.EYE BOLTUsage: In some cases, a pull-back will be required to set a desiredarray down angle. For this purpose, use the supplied load-rated Eye Boltsin place of the lower Bracket Bolts. Use a bridle between the Eye Bolts.SPLAY BRACKETUsage: The supplied pair of Splay Brackets is used to position twoadjacent loudspeakers at the recommended splay angle. The bracketsare fastened to the threaded holes in the back of the enclosures.WARNING: The Splay Brackets are not load-rated and cannot support the weight of the loudspeakers for eithermounting, suspension, or as an array “pull-back”. The user must provide other means to support the full weight ofeach loudspeaker when installed.Bracket Kits: The only difference between Bracket Kits is the actual bracket itself. Each is designed for aspecific JFX model (see table below). Using the incorrect bracket will cause performance problems in theacoustical overlap between the loudspeakers. Use the following list to ensure you have the correct Bracket Kitfor the JFX model loudspeaker you are using.JFX Bracket P/N Description JFX Bracket Kit P/N Description0005355 Bracket/Splay/JFX260 0005911 Bracket Kit/JFX2600005354 Bracket/Splay/JX200 /JFX290 0005912 Bracket Kit/JFX200/JFX2900005356 Bracket/Splay/JFX560 0005913 Bracket Kit/JFX5600005352 Bracket/Splay/JFX590 0005914 Bracket Kit/JFX5900001386Fly Clip1234567892X 1040133/8-16 Eye Bolt |
Related manuals for EAW JFX Suspension Kit
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine