EAW JFX260 Specifications
SPECIFICATIONS JFX260One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.comEAW products are continually improved. All specifications are therefore subject to change without notice. JFX260/0004640/2 pp September 2002 Printed in USAPart Number 0002809System Configuration 2-way, full-rangePowering Switchable: Passive (LF/HFcrossover) or bi-amplifiedLF Subsystem 1x 12-in, ventedHF Subsystem 1x 1.4-in exit/3-in voice coilneodymium compression driveron CD hornControls (switches, knobs) Powering mode switchRecommended High-PassFrequency (24 dB/octave) 60 HzEnclosure Materials Exterior grade Baltic birch plywoodFinish Wear resistant textured black paintConnectors 2x Neutrik NL4 SpeakonHardware Pole mount cup (bottom); 2x 3-position fly track (bottom); 1x11-position fly track (top); 4x5/16”-18 mounting points forOmnimount Series 300 (rear)Grille Powder coated perforated steel,foam backedFrequency Response (1 W @ 1 m)±3 db 90 Hz to 16 kHz-10 dB 60 HzAxial Sensitivity (dB SPL, 1 W @ 1 m)Full Range 97LF 97HF 104Impedance (Ohms)Full Range 8LF 8HF 8Power Handling (Watts, continuous)Full Range 500LF 500HF 200Calculated Maximum Output (dB SPL, @ 1 m)Full Range Peak 130LF/HF Peak 130/133Full Range Long Term 124LF/HF Long Term 124/127Nominal Coverage Angle / -6 dB points (degrees)Horizontal 60Vertical 45PHYSICAL• Ideal size and performance for rigorous all-purpose use• 60° coverage permits creation of optimized horizontalarrays• HF compression driver and vented LF for fully professionalperformance• Asymmetric enclosure provides multiple mounting angles• Pole mount cup & fly track, plus Omnimount®Series 300 or similar mounting points• Passive or bi-amplified operating modesThe JFX260 is a 2-way multi-purpose loudspeaker. Its multi-functional design adds considerably to its value as a full-range loudspeaker. Combining high output and natural repro-duction, it is specifically outfitted to serve in a variety ofboth portable and permanent applications. The asymmetricenclosure provides typical angles needed for ceiling and wallmounting as well as for stage monitor operation. For perma-nent installation, enclosure hardware includes mountingpoints for an Omnimount® Series 300 or similar bracket andfly track for suspension. Provisions for portable use include apole mount cup, top/bottom fly track for rigging, and handlesintegral to the enclosure that facilitate handling and trans-port. The JFX260 is particularly suitable as a near field mainloudspeaker or as a fill/delay element in larger systems.While the JFX260 is well suited as is for many applications,the addition of a subwoofer expands its capabilities for moredemanding applications such as for houses of worship, theaters,and band PA. Six year warranty.• Portable systems or permanent installations• Wall and ceiling mountings• Ideal size and output for wide range ofprogram material• Main PA reinforcement in medium- tolarge-sized spaces• Downfill for flown clusters• High SPL stage lip / delay fill• A/V and/or surround sound installations• Voice & F/X reinforcement in themed attractionsFEATURESDESCRIPTIONAPPLICATIONPERFORMANCE |
Related manuals for EAW JFX260
manualsdatabase
Your AI-powered manual search engine