DECLARATION OF WORKING LOAD LIMIT (WLL)PRODUCTProduct Model: KF760 rigging: 255105, 255106, 255107, 255108KF761 rigging: 255101, 255102, 255103, 255104Description: Rigging AssemblyDimensions (h x w x d): Vary by P/NMaterial: SteelSupplied Accessories: Connecting Pin (button head) p/n 0020558-01OR Connecting Pin (replaced by above) p/n 179084Accessories N/ACOUNTRY OF ORIGIN FOR THE PRODUCT AND COMPONENTSUnited States of AmericaTECHNICAL SPECIFICATIONSSimilarly constructed rigging assemblies are used in many EAW products;please contact the Applications Support Group to determine whether thisapplies to your product. The minimum design factor and Working Load Limitof a single rigging point are provided in the table below. This data isapplicable only when the rigging assembly and loudspeaker are used in themanner described in the user’s manual.WLL (for one rigging point) 816 kg / 1800 lbUltimate Strength Design Factor > 8:1 Pin herefor MAXWLLWLL (for one rigging point) 816 kg / 1525 lbUltimate Strength Design Factor 10:1The ultimate strength for the KF760 and KF761 integral rigging points wasdetermined utilizing calibrated and certified destructive pull tests.A WLL of 1,800 lb (816 kg) with an Ultimate Strength Design Factor >10:1can be achieved by pinning through the loudspeaker above in the normalmanner and pinning through the bottom portion of the hinge as shown to theright.September 2007Eastern Acoustic Works Tel: 800 992 5013One Main Street e-mail: info@eaw.comWhitinsville, Ma 01588 www.eaw.comEAW products are continually improved. All specifications are therefore subject to change without notice.