EAW KF913 Specifications
  |
SPECIFICATIONS KF913PHYSICALOne Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.comEAW products are continually improved. All specifications are therefore subject to change without notice. KF913/888058(B)/2 pp 5/1/00 Printed in USAFEATURESDESCRIPTIONPERFORMANCEAPPLICATION• Medium throw/downfill HF Phased PointSourceTechnology™ module• 3x 2-in HF on separate SimplePhase™ horns• PPST™ systems build arrays for the largest spaces• Pre-configured DSP defines coverage by integratingcells and modules to fit its application• P (install) or F (portable) versions availableA dedicated PPST™ medium throw/downfill high frequencysystem in a trapezoidal enclosure. Includes 3x 2-in exit com-pression drivers on SimplePhase™ horns.The KF913 PPST™ downfill HF module is engineered for use inKF900 Series arrays. It provides HF coverage from -0° to -60°below the array. KF900 Series modules can only be used inarrays and must be integrated with complex PPST processing.Six year warranty.Applications include:Stadiums Concert ToursFrequency Response (1 Watt @ 1m)±3 dB 500 Hz to 14 kHz-10 dB 400 Hz to 16 kHzAxial Sensitivity (dB SPL, 1 Watt @ 1m)HF 114Impedance (Ohm)HF 3x 8Power Handling, AES Standards (Watts)3x 200Recommended Amplifier Power (Watts)HF (MF/HF) 3x 400Calculated Maximum Output (dB SPL @ 1m)HF Peak 148.0HF Long Term 141.0Nominal Coverage Angle, -6 dB Points (degrees)Horizontal 30Vertical Beam profile adjustable viaPPST™ processingRecommended High-Pass Frequency24 dB/Octave 1250 Hz, 500 Hz MinimumRecommended Complementary SystemsSub KF940LF KF930Mid/High KF920/KF910HF Subsystem 3X 2-in exit compression driverson 30° (H) SimplePhase hornsConfiguration Dedicated HF, medium throw,downfillPowering Active processingSystem Crossover 800 Hz to 1300 HzControls (switches, knobs) NoneCabinet Type (shape) TrapezoidalEnclosure Materials Baltic birch plywoodFinish Black catalyzed polyurethaneConnectors One each male and female AP6Suspension Hardware (16) 3/8”-16 threaded mountingpoints (4 each top, bottom andsides)Grille Vinyl coated perforated steel,foam backedDimensions inches millimetersHeight 46.00 1168Width (front) 30.00 762Width (rear) 8.56 217Depth 40.00 1016Trapezoid Angle 15° per SideWeights pounds kilogramsNet Weight 258 117.4Shipping Weight 266 121.0Prototype shown with temporary hardware |
Related manuals for EAW KF913
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine