EAW MKC Series Instructions Manual

Also see for MKC Series: Instructions Instructions Instructions Instructions

EAW MKC Series Instructions Manual Manual pdf 1 page image

Tel 800 992 5013 / +1 508 234 6158 | www.eaw.com1MKC Series Metal Pan & Tilt Bracket InstructionsOriginal InstructionsThese instructions are for defining acceptable MKC Metal Pan & Tilt Bracket installations to amounting surface and for installing an MKC Series or MKD526 Loudspeaker to an MKC SeriesMetal Pan & Tilt Bracket.IMPORTANT SAFETY INSTRUCTIONS – READ THIS FIRSTSafety InstructionsRead and heed all warnings and safety instructions in this manual before using this product.Failure to follow these precautions may result in damage, injury, or death.1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Clean only with a dry cloth.6) Install loudspeaker in accordance with the manufacturer's instructions.7) Do not install near any heat sources such as radiators, heat registers, stoves, or otherapparatus that produce heat.8) Only use attachments/accessories specified by the manufacturer.9) Refer all servicing to qualified service personnel. Servicing is required when the apparatushas been damaged in any way, does not operate normally, or has been dropped.10) Use personal protective equipment not limited to gloves, safety goggles, ear protection,and lifting supports.Suspension WarningsWARNING: Suspending anything, especially overhead of people, should be done with extremecaution. Always engage the services of a certified professional who is qualified to determinethe requirements for and to implement overhead rigging. Only persons with the knowledgeof proper hardware and safe rigging techniques should attempt to suspend loudspeakersoverhead. Failure to follow these precautions may result in damage, injury, or death.