START-S102START-S102_140218_VXX03 _GB www.ebtechnology.it www.nologo.info• Control unit for lights or motor• Supplied with 433Mhz plug-in receiverInstructions and warnings for the installer100%ITALYConnection for the MotorConnection for light groupsLED 1LED 2Led 1 Red lit oncontrol unit withMOTOR functionLed 1 Green lit oncontrol unit withLIGHT function*** First second after turning on of the control unit START-S102 is possible to choose with button P therequired function. Each pression of the button changes into: Command MOTOR Led 1 RED, CommandLIGHTS Led 2 GREEN.N.A.Connection commandes P1 / P2N.A.FUNCTION:Command MOTOR:P1 Input -> Command OPENP2 Input -> Command CLOSECommand LIGHT:P1 Input -> Command LIGHT 1P2 Input -> Command LIGHT 2The connection of the commands P1 / P2 can be done with every button or N.O. contact. When more devicesare available, connect them in parallel.-7--6--5--4--3--2--1-P1 InputP2 InputOpenClosePhase 230 VacNeutral 230 VacMCLOPCOM-7--6--5--4--3--2--1-P1 InputP2 InputLight 2Phase 230 VacNeutral 230 VacLight 1Light 2Light 1-7--6--5--4--3--2--1-P1 InputP2 InputLight 2L 230 VacN 230 VacLight 1