EagleTac M3C4 Instruction Manual
  |
Instruction ManualM3C4800 O.T.F. Lumen MAXUp to 100+ hours runtimeFive brightness levelsThree hidden blinking modesC2800 II circuitEagleTacThe best built flashlight in the worldhttp://www.eagletac.comM3C4 quick spec - ET C2800 II circuit, ET55reflector in L.O.P. finish, HAIII finish, one-piece flashlight head design, IPX-8 water-proof, tail-stand tail-cap, new protectivecoating for all polycarbonate parts, reversebattery polarity protection, CNC machinedstainless steel #304 bezel, A.R. coated lens.WARNING - If you’re planning not to usethe flashlight for an extended period oftime, remove batteries from the flashlightor loosen the flashlight head until the lightno longer turns on.Warranty claimsFor repair or replacement, contact yourEagleTac dealer. For product inquiries, contactus via email at support@eagletac.com. Eagle-Tac warrants our flashlights to be free fromdefects in workmanship and materials. We willrepair, replace at our option, without chargingany product or part which is found to be defec-tive under normal use within 120 months fromthe date of purchase with the proof ofpurchase. Electronics, chargers and recharge-able batteries are covered for a period of 12months with purchase receipt. Such repair orreplacement shall be the purchaser’s sole andexclusive remedy under this warranty. Normalwear and tear including batteries draining isnot covered, nor is damage resulting frommodification, misuse, abuse, neglect, batteryleakage, improper maintenance or repaired byanyone other than EagleTac.Superseding the legendary EagleTac M2series, the new EagleTac M3C4 packs 11Watt of high output LED power in a com-pact flashlight body. The M3C4 pushes 800out-the-front lumen at the turbo mode(SST-50 and triple XP-G R5 models) andoffers a maximum of 100+ hours regulatedoutput at the low output mode (15 lumen).The single-handed operational switchbehind the head allows users to access allfunctions easily without compromise.LED, O.T.F. Output, and RuntimeLuminus SST-50 W65S WJ LED16/56/172/376/800 O.T.F. lumenTriple CREE XP-G Cool White R5 LED15/55/172/393/800 O.T.F. lumenTriple CREE XR-E Cool White R2 LED16/60/165/320/600 O.T.F. lumenCREE MC-E M LED16/52/148/312/625 O.T.F. lumen1.5/3.5/8/28/100+ hours*The CREE XR-E R2 has approx. 10% shorterruntime due to its higher LED forward voltage.Battery types (5V to 13V)Four 3V CR123A batteries orTwo EagleTac Protected 18650 Li-ion batteriesLight activation and usageDial the operational switch behind thehead to toggle the flashlight on/off. Dialthe switch clock-wise to increase thebrightness output and counterclock-wiseto dim it. To access the hiddenstrobe/S.O.S./beacon output, turn the ringrapidly from the turbo mode to theoff/standby mode, then back to the turbomode within 1.5 seconds.To replace batteries, unscrew the head andunload the battery tray. Insert new batter-ies (refer to the terminal sign on thebattery tray) and load the battery tray withthe metals connectors toward the front.WARNING - Lithium and Li-ion batteriescan explode or cause burns if disas-sembled, shorted, or exposed to hightemperature. Do not mix with used orother battery types or install backwards.ET55 Filter System - A diffuser filter isincluded in this package. The optionalYRGB kit includes yellow/red/blue/greencolor coated filters. Unscrew the bezel ringand attach the glass filter to use.Troubleshooting - Flashlight does not turnon or does not stay on.1) Use new batteries or fully chargedrechargable batteries. Old rechargeablebatteries may not hold a charge.2) Ensure the batteries are making goodcontact with the battery tray.3) Ensure the batteries are inserted in thecorrect direction in the battery tray. |
Related manuals for EagleTac M3C4
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine