Eaton 200 A 25 kV class Installation Instructions Manual
Also see for COOPER POWER SERIES: Installation and operation instructionsInstallation instructionsInstallation instructionsInstallation and operation instructionsOperation instructions
  |
GeneralEaton's Cooper Power™ series 200 A, 25 and28 kV insulated standoff bushing meets the fullrequirements of IEEE Std 386™-2006 standard– Separable Insulated Connector Systems andprovides a single loadbreak interface made of highquality peroxide-cured EPDM rubber. It is used toisolate and sectionalize energized cable in pad-mounted cabinets, underground vaults, and otherapparatus. Temporary or permanent parking ofenergized 200 A, 25 kV and 28 kV loadbreak elbowconnectors that conform to IEEE Std 386™-2006standard is simplified with use of the insulatedstandoff bushing.The insulated standoff bushing is designed tobe installed in the parking stand mounted on atransformer or other apparatus. A grounding lugis provided on the standoff bushing bracket forattachment of a drain wire to ensure deadfrontconstruction. When mated with a comparably ratedproduct, the insulated standoff bushing provides afully-shielded, submersible, separable connector forenergized operation.The standard insulated standoff bushing has astainless steel eyebolt with a brass pressure foot.The molded peroxide-cured EPDM rubber bodyis bolted to a stainless steel base bracket usinga galvanized steel holddown ring. A completelystainless steel bracket assembly is available forextremely corrosive environments.InstallationNo special tools are required. A clampstick tool isused to place the standoff bushing in the parkingstand on the front plate of the apparatus. Refer toService Information S500-22-1, 200 A 15, 25, and35 kV Class Insulated Standoff Bushing InstallationInstructions for details.200 A 25 and 28 kV class insulatedstandoff bushing-Canadian EditionLoadbreak ConnectorCatalog DataCA650005EN Effective February 2015Supersedes 500-40C June 2008COOPER P O W ER SERIES |
Related manuals for Eaton COOPER POWER SERIES
Eaton 200 A 15 kV class Installation Instructions Manual
Eaton 200 A 15 kV class Installation Instructions Manual
Eaton 600 A 15 kV class Installation Instructions Manual
Eaton 600 A 35 kV class Installation Instructions Manual
Eaton 600 A 25 kV class PUSH-OP Installation Instructions Manual
Eaton 200 A 35 kV class LE series Installation Instructions Manual
Eaton 600 A 35 kV class PUSH-OP Installation Instructions Manual
Eaton 600 A 15 kV class push-OP Installation Instructions Manual
Eaton 600 A 15 kV class PUSH-OP Installation Instructions Manual
Eaton 600 Ampere Deadbreak Junction 25 kV Class Installation Instructions Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine