Eaton CROUSE-HINDS Series Instruction Sheet

Also see for Crouse-hinds series: Operating instructions Instruction manual Operating instructions Operating instructions Instruction manual

Eaton CROUSE-HINDS Series Instruction Sheet Manual pdf 1 page image

October 2020INS 801-768 Rev BInstruction sheetMTL surge protectionMTL LS15K-KP30 RangeOperating Instructions forLED Lighting T2+T3 SPDEaton Electric Limited,Great Marlings, Butterfield, LutonBeds, LU2 8DL, UK.Tel: + 44 (0)1582 723633 Fax: + 44 (0)1582 422283E-mail: mtlenquiry@eaton.comwww.mtl-inst.com© 2020 EatonAll Rights ReservedPublication No. INS 801-768 Rev B 121020October 20201CAUTIONDo not attempt to open or tamper with the SPD in any way as this willcompromise performance and will void the warranty.Megger and hi-pot tests will damage this device. Disconnect all powersupplying the equipment and isolate the SPD unit before testing.Prior to installation, confirm the SPD is rated for the correct voltage,and frequency equivalent to the application.Installation1) Turn off all power supplying this equipment.2) Mount the SPD using the enclosure flanges to a flat surface.3) Connect the wire leads as per the wiring diagrams below.4) For optimal device performance, use shortest length of wire possible and avoidsharp or unnecessary bends.

/ 2

Related manuals for Eaton Crouse-hinds series