Eaton Cooper Power Series Installation Instructions Manual

Also see for COOPER POWER SERIES: Installation and operation instructions Installation instructions Installation instructions Installation and operation instructions Operation instructions

Eaton Cooper Power Series Installation Instructions Manual Manual pdf 1 page image

600 A 15 and 25 kV class PUSH-OP™insulated standoff bushingGeneralEaton meets the full requirements of IEEEStd 386™-2006 standard, Separable InsulatedConnector Systems with its Cooper Power™series 600 A, 15 and 25 kV insulated PUSH-OP™standoff bushing.The bushing provides a single deadbreak interfacemade of high quality insulating epoxy material.It is used in switchgear, transformers, andother apparatus to isolate and section al ize anenergized cable. Temporary or permanent parkingof energized 600 A 15 and 25 kV PUSH-OPdeadbreak connectors is simplified with the use ofan insulated standoff bushing.The PUSH-OP insulated standoff bushing isde signed to be installed in the parking standmounted on a switchgear, transformer, or otherapparatus. A drain wire lug is provid ed on thestandoff bracket for attach ment of a drain wirelead to ensure deadfront construction. The bushingprovides a fully-shielded, submersible connectionfor deadbreak operation.All standoff bushing brackets have a stainlesssteel eyebolt with a brass pressure foot. Thebushing body is bolted to a stainless steel basebracket using a stainless steel bolt. The bracketand latch mechanism provides easy installationof a PUSH-OP connector without any threadingoperations.InstallationA clampstick tool is used to place the standoffbushing in the parking stand on the front plate ofthe apparatus. The PUSH-OP connector is theninstalled onto the standoff bushing tap. Refer toService Information S600-65-1 600 A 15/25 and35 kV Class PUSH-OP Insulated Standoff BushingInstallation Instructions for complete installationdetails.Production testsTests are conducted in accordance with IEEE Std386™-2006 standard.• ac 60 Hz 1 Minute Withstand• 40 kV• Minimum Corona Voltage Level• 19 kVTests are conducted in accordance with Eatonrequirements.• Physical Inspection• Periodic Dissection• Periodic Fluoroscopic AnalysisDeadbreak ConnectorsCatalog DataCA650043EN Effective April 2015Supersedes 600-25 August 2002COOPER POWERSERIES

/ 4

Related manuals for Eaton COOPER POWER SERIES