DoP00183. Connection details1. Mounting base 2. Sounder/beacon assemblyTable 1. SpecificationSupply voltage (conventional) 18~35 VdcCable size/type 0.5~2.5mm2/FIRETUF, FP200 or MICCCurrent (high volume) 11mACurrent (low volume) 8.7mASound output (high volume)* 90 +/- 3dB(A) : All tonesSound output (low volume)* 80 +/- 3dB(A) : All tonesOperating temperature -10 to +55ºC ( 93% ± 3%RH )Material ABS FR plasticEnvironmental category Type A= IP21CTones 3, see section 4.Flash rate 0.5HzFeature Value Feature ValueSQG3-23 Base sounder VADComp liance EN54-3; EN54-23:2 01014OUT INSCREEN ZONE OUT ZONE IN+VE -VE +VE -VEZONE OUTZONE INNoteScreen must be continuousalong entire length of line.50607080(i) Knockout the requiredfixing holes.(ii) Fix to mounting surfaceusing two suitable screws.(iii) Please ensure all cableentry points are sealedappropriately.If the base deforms on anuneven surface, loosen thescrews or move to a flatterposition.Flash on period 60msNoteTechnical data Effective July 2019 SQG3-2325-12947-E